Rinnai E- Series User Manual

31 008082013GW
T1 Pressure Transducer
T2 sensor
T1 and T2 (swapped).
T2 temperature is measured to be higher than T1. Check
resistance value of T1 and T2 (See resistance chart under error
19 for resistance values. Replace T! and/or T2 if found to be
defective.
WARNING:
Turn off power and water
s
upply
to the boiler before removing or installing any parts.

Rinnai E- Series Specifications

General

Fuel Type	Natural Gas or Propane
Installation	Wall-mounted
Type	Condensing
Venting	Direct Vent
Dimensions	Varies by model
Weight	Varies by model
Warranty	12 years heat exchanger, 5 years parts
Heating Capacity	15, 000 - 199, 000 BTU/h
Vent Type	Direct Vent