Rinnai E- Series User Manual

38 008082013GW
T2 Sensor
Contact for the return sensor T2 open,
indicated by infinite ohm reading.
Remove the plug from the flow sensor as a
result of which error 32 occurs.
WARNING:
Turn off power and water
s
upply
to the boiler before removing or installing any parts.

Rinnai E- Series Specifications

General

Fuel Type	Natural Gas or Propane
Installation	Wall-mounted
Type	Condensing
Venting	Direct Vent
Dimensions	Varies by model
Weight	Varies by model
Warranty	12 years heat exchanger, 5 years parts
Heating Capacity	15, 000 - 199, 000 BTU/h
Vent Type	Direct Vent