C
Clinton MasseyJul 27, 2025
What to do if the gas is off at the meter for Rinnai Furnace?
- Jjohn17Jul 28, 2025
If the gas supply is off at the meter, tank, or valve, the solution is to turn the gas on.
To Next PageTo Next PageWhat to do if the gas is off at the meter for Rinnai Furnace?
If the gas supply is off at the meter, tank, or valve, the solution is to turn the gas on.
What to do if the louver is obstructed in Rinnai EX38CT RHFE-1005FTA2?
If the louver is obstructed, clear the obstruction.
What to do if Rinnai EX38CT RHFE-1005FTA2 Furnace is not plugged in?
If the Rinnai Furnace is not plugged in, the suggested solution is to plug it in.
What to do if Rinnai Furnace has a power failure?
If the unit experiences a power failure, try restarting it.
General| Model Number | EX38CT RHFE-1005FTA2 |
|---|---|
| Category | Furnace |
| Manufacturer | Rinnai |
| Series | EX Series |
| Vent Type | Direct Vent |
| Ignition Type | Electronic Ignition |
| Blower Type | Variable Speed |
| Efficiency | 95% |
| Efficiency Rating | 95% AFUE |
| Fuel Type | Natural Gas |
| Warranty | 5 years parts |
Defines safety alert symbols like DANGER, WARNING, and CAUTION used in the manual.
Provides essential safety rules for operating and installing the appliance, including warnings and cautions.
Details specific installation requirements and regulations, particularly for Massachusetts, concerning safety devices and signage.
Outlines the necessary skills and training required for qualified professionals to install the appliance.
Specifies approved installation types, including residential, commercial, and manufactured homes, with relevant standards.
Highlights the importance of air quality around the vent terminal and furnace to prevent corrosion.
Specifies minimum clearances required from the appliance to combustible materials for safety.
Instructions for connecting the exhaust pipe between the furnace and the flue manifold.
Instructions for connecting the air intake hose between the furnace and the flue manifold.
Guidelines for safe gas connection, leak testing, and ensuring proper gas supply pressure.
Verifies correct gas and electrical connections and power source for the appliance.
Key information for safe and proper operation, emphasizing adherence to instructions and safety precautions.
Critical safety warnings before operating, including gas detection and handling instructions.
Step-by-step guide for safely starting and operating the furnace.
Explains the control panel display, temperature scale settings, and ON/OFF operation.
Details how to activate and deactivate the Child Lock feature to prevent accidental operation.
Instructions for setting and operating the furnace timers for automated heating schedules.
Explains how to use the Energy Saving (Economy) Mode to optimize heating efficiency.
Allows pre-setting a minimum room temperature for frost protection.
Guidance on adjusting the vertical louvers for optimal air flow direction.
Procedures for cleaning and maintaining the appliance, including filters and exterior care.
A table outlining common issues, potential causes, and remedies for troubleshooting the appliance.
Lists conditions and causes that are not covered by the appliance warranty.
Outlines limitations on implied warranties and liability for damages, subject to state laws.
