Rinnai RHFE-434FTA2 User Manual

Direct Vent Wall Furnace
Installation and Operation Manual
EX17CT............... (RHFE-434FTA2)
EX22CT............... (RHFE-559FTA2)
Installer: Leave this manual with the appliance.
Consumer: Retain this manual for future reference.
— Do not store or use gasoline or other ammable vapors and liquids in the vicinity of this or any other
appliance.
— WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electrical switch; do not use any phone in your building.
• Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instrucons.
• If you cannot reach your gas supplier, call the re department.
— Installaon and service must be performed by a licensed professional.
If the informaon in these instrucons is not followed exactly, a re or explosion
may result causing property damage, personal injury or death.
WARNING
READ ALL OF THE INSTRUCTIONS THOROUGHLY BEFORE INSTALLING OR OPERATING
THIS HEATER.
This manual provides information on the installation, operation, and maintenance of the heater. For
proper operation and safety, it is important to follow the instructions and adhere to the safety
precautions.
A licensed professional must install the fan convection heater according to the exact instructions
within this manual.
The consumer must read the entire manual to properly operate the heater and to have regular
maintenance performed.
Register your product at www.rinnairegistration.com or call 1-866-RINNAI1 (746-6241)

Rinnai RHFE-434FTA2 Specifications

General

Category	Furnace
Model Number	RHFE-434FTA2
Fuel Type	Natural Gas
Output BTU/hr	34, 000
Voltage	120V
Vent Type	Direct Vent
Ignition Type	Direct Spark Ignition
Blower Type	Variable Speed
Weight	120 lbs
Heating Capacity	34, 000 BTU/hr