What to do if Rinnai Water Heater starts then the water goes cold?
If your Rinnai Water Heater starts but the water goes cold, verify that the power is still on and try opening your hot water tap further.
What to do if my Rinnai NFINITY 32 has no ignition or gas supply?
If your Rinnai Water Heater has no ignition or gas supply, check that the gas is turned on at both the water heater and the gas meter or cylinder.
What to do if my Rinnai Water Heater starts then the water goes cold?
If your Rinnai Water Heater starts but the water goes cold, verify that the power is still on. Additionally, try opening your hot water tap further.
Why does my Rinnai NFINITY 32 start and then the water goes cold?
If your Rinnai Water Heater starts and then the water goes cold, verify that the power is still on. Also, try opening your hot water tap further.
What to do if there is a power interruption during bath fill with my Rinnai NFINITY 32 Water Heater?
If there's a power interruption during a bath fill and water won't flow on power reinstatement with your Rinnai Water Heater, turn off all hot water taps and press the On/Off button twice.
What to do if Rinnai NFINITY 32 water will not flow on power reinstatement?
If you experience a power interruption while filling a bath and the water doesn't flow when power is restored to your Rinnai Water Heater, turn off all hot water taps and press the On/Off button twice.
How to resolve a condensate pipe blockage in my Rinnai NFINITY 32?
To resolve a condensate pipe blockage in your Rinnai Water Heater, check for any blockages on the condensate drain path.
How to check for condensate pipe blockage in Rinnai NFINITY 32?
If you suspect a condensate pipe blockage in your Rinnai Water Heater, check the condensate drain path for any obstructions.
How to fix noticeable reduction in water flow in Rinnai NFINITY 32?
If you notice a reduction in water flow with your Rinnai Water Heater, the inlet water filter may need cleaning. A service call is recommended.
What to do if there is power interruption during bath fill with my Rinnai NFINITY 32?
If you experience a power interruption during a bath fill and the water will not flow when the power is restored, turn off all hot water taps. Then, press the On/Off button twice.
General| Brand | Rinnai |
|---|---|
| Model | NFINITY 32 |
| Category | Water Heater |
| Language | English |
To Next Page