To Next PageTo Next Page
Need help?Do you have a question about the Rinnai infinity 32 HD 250 E and is the answer not in the manual?
General| Heat Exchanger Material | Copper |
|---|---|
| Maximum Operating Pressure | 1000 kPa |
| Ignition Type | Electronic Ignition |
| Type | Tankless Water Heater |
| Gas Type | Natural Gas / Propane |
| Maximum Hot Water Output | 32 L/min |
| Maximum Gas Rate (Propane) | 136 MJ/h |
| Electrical Requirements | 220-240V AC, 50Hz |
| Water Connection Size | 1/2 inch BSP |
| Gas Connection Size | 1/2 inch BSP |
Procedure to switch the hot water system and controllers on.
Steps to ensure the system is on and select desired temperature.
How to shut down the Infinity unit and what happens if taps are opened.
Safety features active while the hot water tap is open.
How to switch the hot water system and controller on.
Steps to set the 12-hour AM/PM clock on the controller.
How to set the sound volume for temperature controllers.
Steps to control hot water delivery temperature from the Kitchen Controller.
How to switch the hot water system and both controllers on.
Steps to set the 12-hour AM/PM clock on the Kitchen Controller.
Steps to ensure system is on, select temperature, and open tap.
How to program and activate the automatic shower or bath filling.
