Rinnai infinity 32 HD 250 E - OPERATION WITHOUT TEMPERATURE CONTROLLERS

- 7 -
OPERATION WITHOUT TEMPERATURE CONTROLLERS
The Infinity has no pilot light and when installed without Temperature Controllers, the Infinity will
operate automatically as soon as a hot water tap is opened.
The burner ignites with electronic ignition and the flame extinguishes as soon as water flowing
through the appliance stops.
Simply, open a hot water tap.
The Infinity is factory pre-set to 55°C. If you require greater control over
the temperature of your hot water, contact Rinnai about our temperature
controllers to allow precise digital temperature control in the range
37
°
C
~
55
°
C.
Controllers can be easily fitted at any time after installation.
NOTE
NOTE
HOT
COLD
55°C