Rinnai infinity 32 HD 250 E User Manual

- 19 -
OPERATION WITH DELUXE BATHFILL TEMPERATURE
CONTROLLERS
Using the Infinity with 2 Deluxe Bathfill Temperature
Controllers
When 2 Temperature Controllers are used, they must be
models MC-70-2A (Kitchen) and BC-70-2A (Bathroom).
Switching the System ON
The hot water system and both controllers can be
switched on and off from either controllers by
pressing the ‘ON/OFF’ button as shown. When the
system is turned on, the monitor will be lit. During
normal operation the system is left on.
Setting the Clock
The clock is of the 12 hour AM/PM type and is set on the
Kitchen Controller (MC-70-2A).
Press the ‘Clock’ button. The digital monitor
will flash AM 12:00.
Set the time using the ‘Hour’ and ‘Min.’
buttons. The time is displayed on the monitor
as the buttons are pressed. The numbers on the
monitor will continuously change if you keep
the buttons depressed. When you get close to
the desired time, press the button
intermittently.
Press the ‘Clock’ button again to activate the
clock.
Cloc k Hour Mi n.
Vol .
C
AM
Hot wate r
tem p.
00 00
ON/OFF
MC-70-1A
Trans fer
Sound
Cooler Hotter
Clock Hour
Min.
Vol.
C
AM
00 00
ON/OFF
Sound
Clock Hour
Min.
Vol.
C
AM
00 00
ON/OFF
Sound
Clock Hour
Min.
Vol.
C
AM
00 00
ON/OFF
Sound
The time displayed on the Kitchen Controller is automatically displayed on all Bathroom
Controller(s) when the Bathroom Controller(s) are ON. If the controllers are OFF, the time is
onl
y
dis
p
la
y
ed on the Kitchen Controller. The clock ma
y
need to be reset after a
p
ower failure.
NOTE
Clock Hour Min.
Vol .
AM
Hot wate r
tem p.
00 00
ON/OFF
MC-70-1A
Trans fer
Sound
Cooler
Hotter

Rinnai infinity 32 HD 250 E Specifications

General

Brand	Rinnai
Model	infinity 32 HD 250 E
Category	Water Heater
Language	English