What to do if the wireless water controller is 'Out of Range' in Rinnai INFINITY 16?
If the wireless water controller (when fitted) is 'Out of Range' due to the distance from transceiver or an obstruction with your Rinnai Water Heater, try moving the wireless water controller or transceiver, or remove the obstruction.
What to do if Rinnai INFINITY 16 water will not flow on power reinstatement?
If you experience a power interruption while filling a bath and the water doesn't flow when power is restored to your Rinnai Water Heater, turn off all hot water taps and press the On/Off button twice.
What to do if there is power interruption during bath fill with my Rinnai Water Heater?
If you experience a power interruption during a bath fill and the water will not flow when the power is restored, turn off all hot water taps. Then, press the On/Off button twice.
How to fix no ignition / no gas supply on Rinnai INFINITY 16 Water Heater?
If your Rinnai Water Heater isn't igniting or has no gas supply, verify that the gas is turned on at the water heater, gas meter, or cylinder.
What to do if power interruption during Bath fill in Rinnai INFINITY 16 Water Heater?
If a power interruption occurs during a bath fill and water doesn't flow when power is restored to your Rinnai Water Heater, turn off all hot water taps and press the On/Off button twice.
Why does my Rinnai INFINITY 16 start and then the water goes cold?
If your Rinnai Water Heater starts and then the water goes cold, verify that the power is still on. Also, try opening your hot water tap further.
What to do if there is a power interruption during bath fill with my Rinnai INFINITY 16?
If there's a power interruption during a bath fill and water won't flow on power reinstatement with your Rinnai Water Heater, turn off all hot water taps and press the On/Off button twice.
What to do if my Rinnai INFINITY 16 Water Heater experiences flame failure or low gas flow?
If your Rinnai Water Heater experiences flame failure or low gas flow, check that the gas is turned on at the water heater and gas meter or cylinder. Also, check for any obstructions to the flue outlet.
What to do if incorrect dipswitch setting detected in Rinnai Water Heater?
If an Incorrect Dipswitch Setting is Detected on your Rinnai Water Heater, the installer needs to check the Dipswitch Settings. It is recommended to schedule a service call.
How to fix a noticeable reduction in water flow in my Rinnai Water Heater?
If you notice a reduction in water flow in your Rinnai Water Heater, the inlet water filter may need to be cleaned. It is recommended to schedule a service call.
Details safety warnings about hot water scald hazards, especially for vulnerable individuals.
Outlines requirements for licensed installers and relevant licensing bodies for Victorian residents.
Covers essential do's and don'ts for safe operation, including temperature checks and flue safety.
Provides guidance on preventing appliance damage during expected freezing weather.
Lists factory pre-set temperatures and details their adjustability by authorized personnel.
Explains how Universal and Deluxe controllers can be combined and installed.
Identifies and describes the functions of the MC-91Q universal water controller components.
Instructions for powering on the controller and setting the desired water temperature.
Explains how to manage control priority when multiple controllers are installed.
Identifies and describes the functions of the BC-100V deluxe bathroom water controller.
Guides users on setting the clock display and adjusting audible notification preferences.
Provides step-by-step instructions for using the automatic shower saver and bath fill features.
Identifies and describes the functions of the MC-100V deluxe kitchen water controller.
Guides users on setting the clock display and adjusting audible notification preferences.
Explains the purpose and benefits of the SmartStart preheat system.
Provides step-by-step guidance on activating the preheat function for faster hot water delivery.
Details error codes displayed by the unit and their potential remedies for self-diagnosis.
Offers solutions for common faults when the unit is operated without any controllers.
Covers regulations, location, pipe sizing, water supply, and mounting requirements.
Specifies minimum clearances required for horizontal flue terminals to ensure safe operation.
Provides detailed steps for installing Universal, Deluxe Kitchen, and Deluxe Bathroom controllers.
Outlines testing procedures, delivery temperature verification, and gas pressure settings.
General| Weight | 42 lbs |
|---|---|
| Energy Factor | 0.82 |
| Minimum Flow Rate | 0.5 GPM |
| Temperature Control | Digital |
| Maximum Water Pressure | 150 PSI |
| Ignition | Electronic |
| Type | Tankless |
| Flow Rate | 16 L/min |
| Installation | Indoor |
| Gas Type | Natural Gas |
| Temperature Range | 37°C to 60°C |
| Dimensions | 571 mm x 355 mm x 194 mm |
| Maximum Flow Rate | 16 L/min |
| Gas Connection | 1/2" NPT |
| Water Connection | 3/4" NPT |
| Electrical Requirements | 120V |
| Dimensions (H x W x D) | 571 mm x 355 mm x 194 mm |
| Minimum Input | 15, 000 BTU/hr |
To Next Page
