What to do if there is a flame failure / low gas flow in my Rinnai INFINITY 16?
If you experience a flame failure or low gas flow with your Rinnai Water Heater, first, ensure that the gas supply is turned on at both the water heater and the gas meter or cylinder. Then, check for any obstructions that might be blocking the flue outlet.
How to fix a noticeable reduction in water flow in Rinnai INFINITY 16 Water Heater?
A noticeable reduction in water flow in your Rinnai Water Heater might be because the inlet water filter needs cleaning. A service call is recommended.
Why is there flame failure or low gas flow in my Rinnai Water Heater?
Flame failure or low gas flow in your Rinnai Water Heater may occur if the gas is not turned on at the water heater, gas meter, or cylinder. Another possible cause is obstructions to the flue outlet, so check for those as well.
What to do if Rinnai INFINITY 16 starts then the water goes cold?
If your Rinnai Water Heater starts but the water goes cold, verify that the power is still on and try opening your hot water tap further.
What to do if my Rinnai INFINITY 16 starts then shuts down immediately?
If your Rinnai Water Heater starts and then shuts down immediately, ensure the power is still on. Also, check that the gas isolation valves at the unit and the gas meter are fully open. Finally, make sure to open your hot water tap fully.
How to fix a noticeable reduction in water flow in my Rinnai Water Heater?
If you notice a reduction in water flow in your Rinnai Water Heater, the inlet water filter may need to be cleaned. It is recommended to schedule a service call.
What to do if there is power interruption during bath fill with my Rinnai Water Heater?
If you experience a power interruption during a bath fill and the water will not flow when the power is restored, turn off all hot water taps. Then, press the On/Off button twice.
What to do if my Rinnai INFINITY 16 Water Heater does not attempt to start at all?
If your Rinnai Water Heater does not attempt to start at all, check that the power is on at the unit. Also, ensure that the isolation valves at the unit are open.
What to do if Rinnai INFINITY 16 does not start?
If your Rinnai Water Heater isn't starting, make sure the power is on at the unit and check that the isolation valves are open.
What to do if Rinnai INFINITY 16 has flame failure / low gas flow?
If you're experiencing flame failure or low gas flow with your Rinnai Water Heater, start by checking that the gas is turned on at both the water heater and the gas meter or cylinder. Also, ensure there are no obstructions blocking the flue outlet.
Details safety warnings about hot water scald hazards, especially for vulnerable individuals.
Outlines requirements for licensed installers and relevant licensing bodies for Victorian residents.
Covers essential do's and don'ts for safe operation, including temperature checks and flue safety.
Provides guidance on preventing appliance damage during expected freezing weather.
Lists factory pre-set temperatures and details their adjustability by authorized personnel.
Explains how Universal and Deluxe controllers can be combined and installed.
Identifies and describes the functions of the MC-91Q universal water controller components.
Instructions for powering on the controller and setting the desired water temperature.
Explains how to manage control priority when multiple controllers are installed.
Identifies and describes the functions of the BC-100V deluxe bathroom water controller.
Guides users on setting the clock display and adjusting audible notification preferences.
Provides step-by-step instructions for using the automatic shower saver and bath fill features.
Identifies and describes the functions of the MC-100V deluxe kitchen water controller.
Guides users on setting the clock display and adjusting audible notification preferences.
Explains the purpose and benefits of the SmartStart preheat system.
Provides step-by-step guidance on activating the preheat function for faster hot water delivery.
Details error codes displayed by the unit and their potential remedies for self-diagnosis.
Offers solutions for common faults when the unit is operated without any controllers.
Covers regulations, location, pipe sizing, water supply, and mounting requirements.
Specifies minimum clearances required for horizontal flue terminals to ensure safe operation.
Provides detailed steps for installing Universal, Deluxe Kitchen, and Deluxe Bathroom controllers.
Outlines testing procedures, delivery temperature verification, and gas pressure settings.
General| Weight | 42 lbs |
|---|---|
| Energy Factor | 0.82 |
| Minimum Flow Rate | 0.5 GPM |
| Temperature Control | Digital |
| Maximum Water Pressure | 150 PSI |
| Ignition | Electronic |
| Type | Tankless |
| Flow Rate | 16 L/min |
| Installation | Indoor |
| Gas Type | Natural Gas |
| Temperature Range | 37°C to 60°C |
| Dimensions | 571 mm x 355 mm x 194 mm |
| Maximum Flow Rate | 16 L/min |
| Gas Connection | 1/2" NPT |
| Water Connection | 3/4" NPT |
| Electrical Requirements | 120V |
| Dimensions (H x W x D) | 571 mm x 355 mm x 194 mm |
| Minimum Input | 15, 000 BTU/hr |
To Next Page
