Need help?Do you have a question about the Rinnai Infinity HD50i and is the answer not in the manual?
General| Energy Efficiency/Star Rating | ENERGY STAR Certified |
|---|---|
| Maximum Water Pressure | 150 psi |
| Type | Tankless |
| Energy Source/Gas Type | Natural Gas |
| Minimum Input | 15, 000 BTU/hr |
| Temperature Range | 98°F - 140°F |
| Electrical Requirements | 120V |
| Ignition System | Electronic |
Explains warranty for domestic and light commercial use.
Defines commercial use for HD range and specific applications.
Recommended maximum levels for water quality parameters to prevent damage.
Key safety regulations and compliance requirements for installation.
Guidance on optimal placement to minimise delay and ensure accessibility.
Details on mounting requirements, clearances, and terminal placement.
Requirements for permanent ventilation when installing in a compartment.
Guidance on water, gas, and electrical connections, including pipe sizes.
Specifies clearances for flue terminals based on location.
Covers flue installation, length limits, bends, and condensate drains.
Critical safety advice regarding hot water temperatures and child safety.
Advice on checking temperature, frost protection, and flue outlet safety.
Points to consider when deciding on temperature control positions.
Steps for installing the Universal Temperature Controller MC-91-1A.
How to connect one, three, or four temperature controllers.
Available temperature settings for Universal and Deluxe controllers.
Recommended temperature ranges for kitchen, shower, and bath use.
Explanation of digital monitor, indicators, and buttons on the controller.
Step-by-step guide for using a single temperature controller.
Instructions for operating with two or more temperature controllers.
Specific steps to activate and use four temperature controllers.
How to program the master controller for temperatures above 50°C.
Procedure to turn off the hot water system using controllers.
Details on priority switching, cleaning, and temperature variations.
Common faults and remedies when no temperature controllers are fitted.
Specific considerations for systems with circulation pumps.
To Next Page
