Rinnai Infinity VT16 REU-VR1620WG User Manual

Continuous Flow Water
Heaters
Installation Manual
Models are not suitable as a spa or swimming pool heater.
Internal Rinnai continuous ow internal water heaters (‘i’ models) must be installed with an
approved Rinnai ue system.
Appliance must be installed, commissioned and serviced by a licensed tradesperson in
accordance with these instructions and all applicable local rules and regulations.
Your Rinnai continuous ow water heater complies with NZS 5262. A declaration to this effect
can be found on the Energy Safety web site; www.energysafety.govt.nz.
To suit models:
Rinnai Innity VT16 REU-VR1620WG Rinnai Innity HD200 REU-VRM2632WC
Rinnai Innity VT20 REU-VR2024WG Rinnai Innity HDi200 REU-VR2632FFUG
Rinnai Innity VT24 REU-VR2426WG Rinnai Innity HD250 REU-VR3237WG
Rinnai Innity VT26 REU-VR2626WG Rinnai Innity EF24 REU-K2430WG
Rinnai Innity VTa26 REU-VR2626WGT Rinnai Innity EF250 REU-KM3237WD
Rinnai Innity EFi250 REU-KM3237FFUD
i = internal
a = aggressive water

Rinnai Infinity VT16 REU-VR1620WG Specifications

General

Model	REU-VR1620WG
Category	Water Heater
Type	Continuous Flow
Gas Type	Natural Gas or LPG
Maximum Flow Rate	16 L/min
Ignition Type	Electronic
Temperature Range	37-60°C (Optional 50-85°C)
Warranty	12 Years (Heat Exchanger), 3 Years (Parts & Labour)