Why won't my Rinnai infinity 26 touch REU-VRM2626WD ignite; is there no gas supply?
If your Rinnai Water Heater won't ignite and you suspect a gas supply issue, verify that the gas is turned on both at the water heater itself, and at the gas meter or cylinder.
What to do if power interruption occurs during Bath fill of Rinnai infinity 26 touch REU-VRM2626WD Water Heater?
If a power interruption occurs during a bath fill with your Rinnai Water Heater, and water doesn't flow after power is restored, turn off all hot water taps, then press the On/Off button twice.
What to do if my Rinnai Water Heater unit does not attempt to start at all?
If your Rinnai unit isn't starting, first, ensure that the power is on at the unit. Next, check that the isolation valves at the unit are open.
What to do if my Rinnai infinity 26 touch REU-VRM2626WD Water Heater starts then shuts down immediately?
If your Rinnai unit starts and then immediately shuts down, you should: * Check that the power is still on. * Check that the gas isolation valves at the unit and the gas meter are fully open. * Open your hot water tap fully.
What to do if my Rinnai Water Heater has flame failure or low gas flow?
If you're experiencing flame failure or low gas flow with your Rinnai Water Heater, check that the gas is turned on at both the water heater and the gas meter or cylinder. Also, inspect the flue outlet for any obstructions.
What causes a noticeable reduction in water flow in Rinnai infinity 26 touch REU-VRM2626WD Water Heater?
A noticeable reduction in water flow from your Rinnai Water Heater indicates that the inlet water filter likely needs cleaning. A service call might also be required.
What causes Wireless water controller of Rinnai Water Heater to be ‘Out of Range’?
If your Rinnai Water Heater's wireless water controller is 'Out of Range', this could be due to the distance from the transceiver or an obstruction. Try moving the wireless water controller or transceiver, or remove any obstruction.
General| Brand | Rinnai |
|---|---|
| Model | infinity 26 touch REU-VRM2626WD |
| Category | Water Heater |
| Language | English |
Information for Victorian consumers regarding installation licensing and compliance.
Details dangers of hot water, especially for vulnerable groups, and safety measures.
Guidelines for cleaning water controllers and general safety advice.
Explains temperature limitations and important operational notes for safe use.
How the water heater operates when no controllers are fitted.
Safety precautions related to hot water temperature and usage.
Information on wireless controller radio frequencies and water resistance limits.
Details factory pre-set temperatures and potential adjustments.
Lists temperature options for Master and Bathroom controllers.
Describes the MC-503RC controller's components, indicators, and status displays.
Instructions for powering on the controller and setting the desired water temperature.
Introduction to the Rinnai Smartstart pre-heat system functionality.
Step-by-step guide on how to activate the preheat feature.
Details the MC-91Q universal controller's features and indicators.
Instructions for operating and setting temperature on the MC-91Q.
Introduction to the BC-100V controller, its parts, and initial operations.
Introduction to the MC-100V kitchen controller and its features.
Instructions for powering on the controller and configuring sound settings.
Overview of the wired Smartstart pre-heat system.
Guide to activating the wired Smartstart pre-heat function.
Lists error codes, their meanings, and suggested solutions.
Addresses issues with power display and operation without controllers.
Guidance on when and how to contact for service.
Covers installation regulations and suitable placement of the appliance.
Details water supply requirements and hot water delivery temperature considerations.
Instructions for mounting the appliance and making service connections.
Steps for physically installing and connecting the transceiver unit.
Procedure for configuring the transceiver's maximum temperature setting.
Initial steps for installing wireless water controllers.
Detailed process for tuning and assigning wireless controllers.
Guidelines for controller placement and cable management.
Instructions for installing the MC-91Q universal water controller.
Steps to follow for initial testing of the installed appliance.
How to verify the hot water delivery temperature after installation.
To Next Page