EasyManua.ls Logo

Rinnai Infinity HD50i - Unpacking Rinnai Water Heater

Rinnai Infinity HD50i
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
UNPACKING RINNAI WATER HEATER
• After unpacking the appliance check for damage, if the heater is damaged contact
your supplier immediately. Do not install a damaged appliance before checking
with your supplier.
• A heater accessories pack is inside the carton. One remote control is supplied
with the Infinity 26i. The HD50i does not come with controllers because it is a
commercial unit. It is compatible with them if they are required.
• Check that the appliance supplied is the correct gas type for the installation. Refer
to the data plate located on the left-hand side of the appliance.
• Remove the heater and the accessories from the carton, and check that all the
parts are included . The remote control cable is provided with spade connectors.
Quantity
Description
Remote Control Parts
1
Temperature controller MC-91-1A
1
Cable clamp
1
Cable Clamp
5
Spade connectors
1
Control cable 20 metres
Unit Mounting Fasteners
1
Clamp screw
5
Screw
5
Screw