Need help?Do you have a question about the Rinnai INFINITY and is the answer not in the manual?
General| Type | Tankless |
|---|---|
| Temperature Control | Digital |
| Fuel Type | Natural Gas or Propane |
| Ignition Type | Electronic |
| Installation | Wall-mounted |
| Energy Factor (EF) | 0.82 |
| Safety Features | Freeze Protection, Overheat Protection |
| Warranty | 5 years parts |
Installation on an external wall with specific thickness limits for EF and XR/HD models.
Extending flueing horizontally through an external wall for longer distances.
Installation where the unit is flued vertically through the roof.
A combination of vertical and horizontal flueing methods.
Ensures the flue is fully supported independently of the appliance using suitable clips.
Chart detailing maximum flue length and number of bends for installation.
Adequate clearance from the building is required for vertical flue terminations.
Ensures minimum distances are maintained between multiple flue terminals.
Details on wall mounting bracket adjustability for flue spigot centres.
Explains condensate collection, its acidic nature, and recommended materials.
Protects the white flue pipe from UV damage with black moulded sections.
Guidance on pipe overlap and cutting procedures for air-tightness.
Details on using FFSSKIT for direct and horizontal extension flueing.
Information on vertical straight and combination flueing setups.
Specifications for 90 degree (FFSSBEND90) and 45 degree (FFSSBEND45) bends.
Description of black UV injection moulded pipe sections for roof cowls.
Details on white and black wall trims included with the FFSSKIT.
Information on the roof cowl (FFSSROOFCOWL) for vertical installations.
To Next Page