To Next Page
C
Corey JamesAug 21, 2025
Why does my Rinnai Infinity N32i Water Heater start then go cold?
- TTara RyanAug 21, 2025
If your Rinnai water heater starts but the water then goes cold, verify the power supply and open the hot water faucets more.
Why does my Rinnai Infinity N32i Water Heater start then go cold?
If your Rinnai water heater starts but the water then goes cold, verify the power supply and open the hot water faucets more.
How to troubleshoot Rinnai Infinity N32i Water Heater with no ignition?
If your Rinnai water heater fails to ignite, check that the gas is turned on at both the water heater and the gas meter or cylinder. It is recommended to schedule a service call.
What to do if Rinnai Infinity N32i starts then shuts down immediately?
If your Rinnai Water Heater starts and then shuts down right away, you should check the power supply and the gas cock. Also, make sure to open the hot water faucets more to ensure sufficient water flow.
Why does my Rinnai Infinity N32i start then the water goes cold?
If your Rinnai Water Heater starts but the water then goes cold, check the power supply. Additionally, ensure that the hot water faucets are opened sufficiently to allow enough hot water to flow.
What does 'Service Soon' mean on Rinnai Infinity N32i Water Heater?
If your Rinnai water heater displays 'Service Soon', it’s time for a service. The heat exchanger may need to be flushed to prevent damage. Refer to the flushing instruction in the manual.
How to fix Rinnai Infinity N32i that does not attempt to start?
If your Rinnai Water Heater isn't starting at all, you should check the power supply. You may also need to clean the water filter and inspect the water inlet on the appliance.
How to fix Rinnai Water Heater that won't start?
If your Rinnai Water Heater isn't starting, you can try the following: check the power supply, clean the water filter, and inspect the water inlet on the appliance.
How to fix low water flow in Rinnai Infinity N32i?
If you notice a reduction in water flow in your Rinnai water heater, the inlet water filter likely needs to be cleaned. It is recommended to schedule a service call.
What causes flame failure in Rinnai Infinity N32i?
If you are experiencing flame failure or low gas flow with your Rinnai water heater, check that the gas is turned on at the water heater and gas meter or cylinder. Also, check for any obstructions to the flue outlet. It is recommended to schedule a service call.
What to do if Rinnai Infinity N32i exhaust gas temperature is too high?
If your Rinnai water heater shows a high exhaust gas temperature, ensure the condensate line is not blocked and confirm the inlet water temperature is not too high. It is recommended to schedule a service call.
General| Brand | Rinnai |
|---|---|
| Model | Infinity N32i |
| Category | Water Heater |
| Language | English |
