Rinnai INFINITY 32 User Manual

To Suit Water Heater Models -
INFINITY 32 REU-VR3237WG
INFINITY 26 REU-VR2626WG
INFINITY 26 Plus REU-VRM2630WD
INFINITY 26i REU-VR2632FFUG
INFINITY 20 REU-VR2024WG
INFINITY 16 REU-VR1620WG
INFINITY ENVIRO 32 REU-KM3237WD
INFINITY ENVIRO 26 REU-KM2635WD
B16 REU-VR1620WB
B20 REU-VR2024WB
B24 REU-VR2426WB
HD250e REU-VRM3237WC
HD200e REU-VRM2632WC
HD200i REU-VRM2632FFUC
Operation / Installation
Manual
Rinnai continuous flow water heaters
This appliance shall be installed in accordance with:
• Manufacturer’s Installation Instructions
• Current AS/NZS 3000, AS/NZS 3500 & AS/NZS 5601
• Local Regulations and Municipal Building Codes including local OH&S requirements
This appliance must be installed, maintained and removed by an Authorised Person.
For continued safety of this appliance it must be installed operated and maintained
in accordance with the manufacturers instructions.

Rinnai INFINITY 32 Specifications

General

Type	Tankless
Gas Type	Natural Gas or Propane
Installation	Indoor or Outdoor
Energy Factor	0.82
Maximum Flow Rate	9.8 GPM
Minimum Flow Rate	0.4 GPM
Activation Flow Rate	0.4 GPM
Ignition Type	Electronic
Temperature Range	98°F to 140°F
Maximum BTU Input	199, 000 BTU
Minimum BTU Input	15, 000 BTU/hr
Venting	Direct Vent
Vent Material	PVC, CPVC
Electrical Requirements	120V, 60Hz
Warranty	12-year heat exchanger, 5-year parts, 1-year labor