To Next PageTo Next PageWhy Rinnai Water Heater has no ignition or gas supply?
If your Rinnai Water Heater isn't igniting or has no gas supply, verify that the gas is turned on both at the water heater itself, and at the gas meter or cylinder.
How to fix noticeable reduction in water flow in Rinnai INFINITY 32 Water Heater?
If you notice a reduction in water flow in your Rinnai Water Heater, the inlet water filter may need cleaning. It is recommended to request a service call.
What to do if Heat Exchanger Outlet Sensor is Faulty in Rinnai Water Heater?
If the Heat Exchanger Outlet Sensor in your Rinnai Water Heater is faulty, it is recommended to request a service call.
What to do if Gas Modulating Valve is Faulty in Rinnai INFINITY 32 Water Heater?
If the Gas Modulating Valve in your Rinnai Water Heater is faulty, it is recommended to request a service call.
What to do if Combustion Fan Failure in Rinnai INFINITY 32?
If there is a Combustion Fan Failure in your Rinnai Water Heater, it is recommended to request a service call.
General| Type | Tankless |
|---|---|
| Gas Type | Natural Gas or Propane |
| Installation | Indoor or Outdoor |
| Energy Factor | 0.82 |
| Maximum Flow Rate | 9.8 GPM |
| Minimum Flow Rate | 0.4 GPM |
| Activation Flow Rate | 0.4 GPM |
| Ignition Type | Electronic |
| Temperature Range | 98°F to 140°F |
| Maximum BTU Input | 199, 000 BTU |
| Minimum BTU Input | 15, 000 BTU/hr |
| Venting | Direct Vent |
| Vent Material | PVC, CPVC |
| Electrical Requirements | 120V, 60Hz |
| Warranty | 12-year heat exchanger, 5-year parts, 1-year labor |
Information for Victorian consumers regarding appliance installation by licensed persons.
Crucial safety advice regarding the dangers of scalding from hot water, especially for vulnerable individuals.
Details factory pre-set maximum delivery temperatures for various Rinnai water heater models.
Explains available configurations for Universal and Deluxe water controllers and their combinations.
Overview of the MC-91Q Universal water controller and its components.
Step-by-step guide on how to switch on the Universal water controller.
Instructions for adjusting the water temperature using the Universal controller.
Guide on operating multiple Universal water controllers simultaneously.
Explains how to transfer control priority between Universal controllers.
Crucial safety advice for checking water temperature before use.
Overview of the BC-100V Deluxe Bathroom water controller and its features.
Instructions for powering on the Deluxe Bathroom water controller.
Guide to configuring sound settings on the Deluxe Bathroom controller.
Instructions for setting the clock on the Deluxe Bathroom controller.
How to adjust water temperature using the Deluxe Bathroom controller.
Guide to using the Shower Saver/Bath Fill function for preset water volume and temperature.
Instructions on how to terminate the Shower Saver/Bath Fill operation.
Information on operating multiple water controllers together.
Overview of the MC-100V Deluxe Kitchen water controller and its features.
Steps to turn on the Deluxe Kitchen water controller.
How to configure sound settings for the Deluxe Kitchen controller.
Guide to setting the clock on the Deluxe Kitchen controller.
Instructions for adjusting water temperature with the Deluxe Kitchen controller.
Introduction to the Smartstart® preheat system and its benefits.
Detailed steps on how to activate and use the Smartstart® preheat function.
Explanation of error codes and their corresponding remedies for diagnosing faults.
Solutions for common faults when no water controllers are fitted.
General guidelines and regulations for appliance installation.
Detailed instructions for installing Rinnai water controllers.
Procedures for testing and verifying the appliance after installation.
Lists the regulations and standards that must be followed during installation.
Specifies which Rinnai models these installation instructions apply to.
Guidelines for selecting the appropriate location for appliance installation.
Recommendations for sizing gas and water pipes for optimal performance.
Requirements and considerations for the water supply to the appliance.
Regulations and considerations for setting hot water delivery temperatures.
Instructions on how to securely mount the water heater appliance.
Details on the appliance's connection points for gas, water, and other services.
Specifies minimum clearances required around the horizontal flue terminal.
Guidelines on obstructions near the flue terminal to prevent operational issues.
Considerations for installing multiple external models side-by-side.
Provides detailed dimensions for appliances and water controllers.
Instructions for installing coaxial flue systems for internal models.
Key points to consider when installing the condensate drain pipe.
Guidelines on maximum lengths and bends for condensate drain lines.
Specific installation requirements for condensate drain lines.
How to connect multiple condensate drain lines.
Procedures for discharging condensate into a common stack.
Installation requirements for tundish drain lines.
Precautions for drain lines in areas prone to freezing.
General information about Rinnai water controllers.
Guidelines for locating and mounting water controllers.
Information on connecting and extending water controller cables.
Step-by-step guide to fitting the MC-91Q Universal controller.
Optional programming steps for the MC-91Q controller.
Instructions for installing the MC-100V Deluxe Kitchen controller.
Instructions for installing the BC-100V Deluxe Bathroom controller.
How to connect communication cables from controllers to the water heater.
Procedures for testing the appliance and its functions after installation.
Information on setting and verifying hot water delivery temperatures.
Instructions for setting the gas pressure for the appliance.
A checklist to ensure all commissioning steps are completed correctly.
