Rinnai infinity 32 HD 250 E - Using the Infinity with 3 Deluxe Bathfill Temperature Controllers and 1 Standard; Only); Standard Temperature Controller; Shower Saver; Bath Fill Function

- 25 -
OPERATION WITH DELUXE BATHFILL TEMPERATURE
CONTROLLERS
Using the Infinity with 3 Deluxe Bathfill Temperature Controllers and
1 Standard Temperature Controller
(Infinity 26, Heavy Duty 26 & Heavy Duty 26 -
Internal only)
When 3 to 4 Temperature Controllers are used for the Infinity, there must be one
MC-70-2A (Kitchen), one or two BC-70-2A (Bathroom), and one MC-91-1A (Standard).
Switching the System On
The hot water system and three controllers can be switched on and off from any controller by
pressing the ‘ON/OFF’ button as shown. When the system is turned on, the monitors will be lit.
During normal operation the system is left on.
Setting the clock
See page 21 for details on setting the clock.
Setting the Sound Volume
See page 22 for details on setting the sound volume.
Using Hot Water
The hot water delivery temperature can be controlled from the Kitchen Controller (MC-70-2A),
Bathroom Controller (BC-70-2A) or Standard Controller (MC-91-1A) . See pages 21 to 22 and page
10 for details on setting the hot water delivery temperature for the Kitchen and Bathroom Controllers.
Shower Saver / Bath Fill Function
The ‘Shower saver / Bath fill’ function can only be used on Temperature Controller BC-70-2A. See
pages 22 to 24 for details on the ‘Bath fill’ function.
Clock Hour Min.
Vol .
C
AM
Ho t wa ter
tem p.
00 00
ON/OFF
MC-70-1A
Tran sfer
Sound
Cooler
Hott er
Cloc k Hour Min.
Vol .
AM
Ho t wa ter
tem p.
00 00
ON/OFF
MC-70-1A
Trans fer
Sound
Cooler Hotte r
CHECK WATER TEMPERATURE BEFORE USE.
A parent should always check the temperature before a child is placed in contact with hot water
.
CAUTION
When any hot water tap is open, temperature cannot be adjusted except between 37°C and 43°C.
For safety reasons, temperature ‘priority’ cannot be transferred between controllers when a hot
water ta
p
is o
p
en
NOTE