Rio Intense Pulsed Light - Instructions for Use: Post-Flash and Power Adjustment; Post-Flash Checks and Increasing Power Levels

18
STEP 8
The blue lights will go out
after the treatment flash.
The unit will also self-
check after each flash.
This takes five seconds, during this time the
power level lights will illuminate up and down.
When moving the wand to the next area, the
skin sensors must be lifted off the skin.
If you are increasing power
for the next treatment,
press the (+) button and
return to step 5.
Important: Do NOT exceed
the maximum power level
for your skin type.
AFTER USE
Turn the key anticlockwise
to the OFF position to
lock. Remove and store
the key in a safe place
away from children.
INSTRUCTIONS FOR USE
INCREASING THE POWER LEVEL
Each time you use your IPL you will
need to do a treatment flash on each
power level before you can increase
the power to the next level. This is a
safety feature to ensure you are aware
of the treatment intensity at each level.
A self-check lasting a few seconds is
performed whenever the power level is
increased.Duringthistime,thepower
levels will illuminate up and down.
8