Need help?Do you have a question about the Rion VT-06 and is the answer not in the manual?
Explains the meaning of 'Caution', 'Important', and 'Note' symbols used for safety warnings.
Provides essential precautions regarding rotor usage, container compatibility, and measurement accuracy.
Illustrates the main unit and accessories including rotors, cup, batteries, and AC adapter for the Viscotester VT-06.
Details the top view of the unit, highlighting the operation key panel, display, and bottom cover.
Describes the rear view, identifying the battery compartment, cup mounting pin, and rotor mounting shaft.
Explains the bottom view, showing the DC IN jack and MODE selector switch for power and operation mode.
Shows an example of the unit's display, indicating rotor number, status, and measurement values.
Details the function of each key on the operation panel for controlling the Viscotester VT-06.
Covers powering the unit via AC adapter or batteries, including connection and insertion instructions.
Explains battery types, selector switch use, and how to check battery voltage for operation.
Guides on selecting and attaching the correct rotor to the mounting shaft, noting the left-hand thread.
Explains how to choose the rotor and prepare the sample fluid volume for accurate viscosity measurements.
Describes the foldable rotor extension, its assembly, connection, and how to use it for measurements.
Explains the meaning of 'Caution', 'Important', and 'Note' symbols used for safety warnings.
Provides essential precautions regarding rotor usage, container compatibility, and measurement accuracy.
Illustrates the main unit and accessories including rotors, cup, batteries, and AC adapter for the Viscotester VT-06.
Details the top view of the unit, highlighting the operation key panel, display, and bottom cover.
Describes the rear view, identifying the battery compartment, cup mounting pin, and rotor mounting shaft.
Explains the bottom view, showing the DC IN jack and MODE selector switch for power and operation mode.
Shows an example of the unit's display, indicating rotor number, status, and measurement values.
Details the function of each key on the operation panel for controlling the Viscotester VT-06.
Covers powering the unit via AC adapter or batteries, including connection and insertion instructions.
Explains battery types, selector switch use, and how to check battery voltage for operation.
Guides on selecting and attaching the correct rotor to the mounting shaft, noting the left-hand thread.
Explains how to choose the rotor and prepare the sample fluid volume for accurate viscosity measurements.
Describes the foldable rotor extension, its assembly, connection, and how to use it for measurements.
General| Type | Vibration Meter |
|---|---|
| Power Supply | 9V battery |
| Frequency Range | 10 Hz to 1 kHz |
| Accuracy | ±5% ±2 digits |
| Display | LCD |
| Output | AC output (2V RMS full scale) |
To Next Page
