vii
•
The rubber section of the rotor mounting shaft may drop out at the time of
measurement. When you want to avoid the foreign material to a sample,
remove the rubber section at the time of measurement.
•
Remove the batteries from the unit when it is not being used, to prevent
the possibility of damage by leaking battery uid.
•
Protect the unit from water, dust, extreme temperatures, humidity, and direct
sunlight during storage. Also keep the unit away from air with high salt or
sulphur content, gases, and stored chemicals during storage and use.
•
Do not try to disassemble or alter the unit.
•
Dispose of the unit and of batteries only according to national and local
regulations at the place of use.
•
Do not tap the LCD panel of the unit with a pointed object such as a
pencil, screwdriver, etc.
To Next Page
Loading...
Need help?
General
