29
h. Problem: Some of the barcode data is missing displayed on the host.
Possible Cause Possible Solution
The scanner’s transmit speed is too
fast.
For RS232, you can set up the
scanner’s transmit speed.
i. My Caps Lock LED on my keyboard flickers when I read a bar code.
Possible Cause Possible Solution
The Keyboard Country that you are
using requires shifting in and out of
the shift Lock mode to send the data
properly.
This is normal operation. You can
reduce the flickering and speed the
data transmit by sending numerics as
keypad numerics, or setting the
keyboard country to UNIVERSAL
mode.
To Next Page
