Rippton INTREPID - 3.2.11 Common Settings; App Common Settings and Parameters; 4. Fail-Safe; Fail-Safe Return-to-Home Features

3.2.11COMMON SETTINGS
 Learner Mode
Under the Leaner Mode, the boat will only sail within 30 meters
centered by the location of your mobile device

Set-up of Sailing Range (30-250m)
The preferred Sailing Distance: 30-250m
 Compass Calibration
Pleases refer to Step 3.2.5
 Category of Map
Select one category of map: Terrain, Hybrid, Satellite
 Version Number
Check the version number of the firmware installing in your boat
4. FAIL-SAFE
There are 3 ways to trigger the “Return-to-Home” mechanism, provided that the home point
has been set.
1. Low battery return:
Set the lowest value (6.5-6.8V) for Low
Voltage Alarm. When the battery voltage
reaches such value, the boat will return to the
home point automatically.
When the voltage is lower than 6.5, the boat's
position light will continuously flash rapidly
three times per second, with a reminder every
one minute.
2. Lost connection to remote:
When the remote powered off or the boat sails beyond the range of 400m, the boat will return by itself.
3. One button to return to home point:
Please refer to Step 3.1.5.1.d
Note: When the battery level of the remote is less than 5%, the remote will vibrate continuously till
pressing the “Enter/ESC” button to stop.