Risco RVCM11H User Manual

20
Parameter
Alarm Port
1-channel input and 1-channel output (on-off )
Record and Backu
p
Record Priority
Support remote record only Manual>Video detect>Schedule
SD Card Storage
Support Micro SD card hot-swap
Storage Management
Support display network storage status
Network
Wire Network
1-channel wire Ethernet port, 10/100 Base-T Ethernet
Wireless Network
IEEE802.11a/b/g/n, built-in antenna
Network Protocol
Standard HTTP, TCP/IP, ARP, IGMP, ICMP, RTSP, RTP,UDP, RTCP, SMTP,
FTP, DHCP, DNS, DDNS UPNP, NTP, Bonjour, SNMP.
Remote Operation
IR light
Monitor, system setup, file download, log information, maintenance , upgrade
and etc.
AUX Port
Compensation Light
White light (Max 1W)
Auto turn on white light when an alarm is activated. The light can last until the
alarm ends.
Support compensation light brightness setup via the Web.
N/A N/A
WPS
Click one button to enable WIFI connection
General Parameter
Power
DC 12V
Warning
！
Do not connect these two power supplying sources to the device at the same
time; it may result in device damage!
Power Consumption
6W MAX
Working Temperature
-10 ~+50
Working Humidify
10%~90%
Dimensions(mm)
66.6*99.5*131.2
Weight
229g
（ Excluding box）
Installation
Installation with the bracket.

Risco RVCM11H Specifications

General

Brand	Risco
Model	RVCM11H
Category	IP Camera
Language	English