Why is the back of printed copies smudged with ink on my Riso 220?
If the back of your printed copies from the Riso All in One Printer is smudged with ink, it is likely that the Pressure Roller has been stained. To resolve this, remove the Print Drum (Cylinder) and clean the Pressure Roller.
How to fix paper jam on Riso All in One Printer paper feed tray?
If your Riso All in One Printer displays a paper jam on the Paper Feed Tray section, remove the jammed paper. Then, set paper again. If the error indications do not disappear, press the key.
How to resolve master jam in Riso 220?
If a master jam has occurred in the master disposal section of your Riso All in One Printer: 1. Remove the Master Disposal Box. 2. Stand at the side of the Paper Feed Tray and push down the Master Disposal Roller Release Lever. 3. Remove the master jammed on the roller section. 4. Push the Master Disposal Roller Lock Lever inward. 5. Set the Master Disposal Box.
What to do if custom-size paper is used during 2-Up printing on Riso 220 All in One Printer?
If custom-size paper has been placed on the Paper Feed Tray at the time of 2-Up printing on your Riso All in One Printer, press the key and then place regular-sized paper.
How to close front cover on Riso 220 All in One Printer?
If the Front Cover of your Riso All in One Printer is open or has not been completely closed, close the Front Cover completely.
General| Paper Weight | 46 gsm to 157 gsm |
|---|---|
| Image Modes | Photo, Text |
| Ink Supply | RISO Ink Cartridge |
| Master Supply | RISO Master Roll |
| Power Source | AC 220-240V, 50/60Hz |
To Next Page
