Why is the back of printed copies smudged with ink on my Riso EZ 200 All in One Printer?
If the back of your printed copies from the Riso All in One Printer is smudged with ink, it is likely that the Pressure Roller has been stained. To resolve this, remove the Print Drum (Cylinder) and clean the Pressure Roller.
How to fix paper jam on Riso EZ 200 paper feed tray?
If your Riso All in One Printer displays a paper jam on the Paper Feed Tray section, remove the jammed paper. Then, set paper again. If the error indications do not disappear, press the key.
How to resolve master jam in Riso EZ 200?
If a master jam has occurred in the master disposal section of your Riso All in One Printer: 1. Remove the Master Disposal Box. 2. Stand at the side of the Paper Feed Tray and push down the Master Disposal Roller Release Lever. 3. Remove the master jammed on the roller section. 4. Push the Master Disposal Roller Lock Lever inward. 5. Set the Master Disposal Box.
What to do if custom-size paper is used during 2-Up printing on Riso EZ 200 All in One Printer?
If custom-size paper has been placed on the Paper Feed Tray at the time of 2-Up printing on your Riso All in One Printer, press the key and then place regular-sized paper.
How to close front cover on Riso EZ 200?
If the Front Cover of your Riso All in One Printer is open or has not been completely closed, close the Front Cover completely.
How do I do if I want to check or remove the drum if it brings code number 3
General| Type | Digital Duplicator |
|---|---|
| Resolution | 300 x 300 dpi |
| Paper Weight | 46 gsm to 157 gsm |
| Paper Capacity | 500 sheets |
| Image Modes | Text, Photo, Text/Photo |
| Interface | USB 2.0 |
| Ink Type | RISO Ink |
| Paper Feed Tray Capacity | 500 sheets |
| Paper Receiving Tray Capacity | 500 sheets |
| Reduction/Enlargement | 50% - 200% |
| Power Source | AC 220-240V, 50/60Hz |
Details the various physical parts of the machine.
Describes the main operational controls and interfaces of the machine.
Outlines essential safety precautions for installing the machine.
Specifies the types, sizes, and weight of paper usable with the machine.
Describes acceptable originals for scanning and printing, including size limits.
Guides on setting up paper trays and loading paper before printing.
Provides crucial safety precautions for handling and operating the machine.
Explains the fundamental master-making and printing processes.
Details the procedure for printing from physical paper documents.
Explains how to choose the appropriate scanning mode based on original content.
Guides on adjusting the size of scanned originals using standard ratios or zoom.
Describes how to print two originals side-by-side on a single sheet of paper.
Explains how to print sample copies to check print quality after adjustments.
Details how to adjust print density levels for optimal output on specific models.
Guides on adjusting the vertical and horizontal print position for alignment.
Describes how to program the machine for automatic sorting of prints into groups.
Allows changing default machine settings and operational parameters.
Explains how to register administrators and users with PIN codes and access restrictions.
Details how to print usage reports for all users, showing access and counts.
Provides step-by-step instructions for replacing the ink cartridge.
Guides on how to replace the master roll when it is consumed.
Details the procedure for removing and installing the print drum (cylinder).
Outlines essential safety precautions to be observed before cleaning the machine.
Instructions for cleaning the delicate thermal print head component.
Instructions for cleaning the scanner glass and white sheet of the ADF unit.
Explains how to interpret error codes and indicators shown on the machine's display.
Offers practical advice and procedures for resolving common machine issues.
Lists and describes optional accessories available to enhance machine capabilities.
Provides detailed technical specifications for various machine models.
To Next Page
