Why is the back of printed copies smudged with ink on my Riso EZ 330 All in One Printer?
If the back of your printed copies from the Riso All in One Printer is smudged with ink, it is likely that the Pressure Roller has been stained. To resolve this, remove the Print Drum (Cylinder) and clean the Pressure Roller.
How to fix paper jam on Riso All in One Printer paper feed tray?
If your Riso All in One Printer displays a paper jam on the Paper Feed Tray section, remove the jammed paper. Then, set paper again. If the error indications do not disappear, press the key.
How to resolve master jam in Riso EZ 330 All in One Printer?
If a master jam has occurred in the master disposal section of your Riso All in One Printer: 1. Remove the Master Disposal Box. 2. Stand at the side of the Paper Feed Tray and push down the Master Disposal Roller Release Lever. 3. Remove the master jammed on the roller section. 4. Push the Master Disposal Roller Lock Lever inward. 5. Set the Master Disposal Box.
What to do if custom-size paper is used during 2-Up printing on Riso All in One Printer?
If custom-size paper has been placed on the Paper Feed Tray at the time of 2-Up printing on your Riso All in One Printer, press the key and then place regular-sized paper.
How to close front cover on Riso EZ 330?
If the Front Cover of your Riso All in One Printer is open or has not been completely closed, close the Front Cover completely.
General| Type | Digital Duplicator |
|---|---|
| Resolution | 300 x 300 dpi |
| Connectivity | USB |
| Original Type | Sheet |
| Original Size | Max 297 x 432 mm |
| Paper Capacity | 1, 000 sheets |
| Master Removal | Automatic |
| Image Processing Mode | Photo |
| Ink Type | RISO Ink |
| Power Source | AC 220 - 240 V, 50/60 Hz |
Identifies and describes the various physical parts and components of the machine.
Provides essential safety precautions and guidelines for the machine's installation.
Explains how to connect the machine to a computer for enhanced functionality.
Specifies the types, sizes, and weights of paper suitable for use with the machine.
Details the size and weight restrictions for original documents to be scanned.
Guides on setting up the paper feed tray for printing operations.
Instructions on how to configure the paper receiving tray for printed output.
Outlines safety precautions for operating and handling the machine.
Information regarding ink, master rolls, and storage recommendations for consumables.
Explains the fundamental master-making and printing processes.
Step-by-step guide on printing from physical documents using the glass platen or ADF.
Instructions for printing documents sent from a computer.
Guide to choosing the correct image processing mode for optimal scan quality.
Explains how to use the Pencil mode for improved scanning of pencil-written originals.
Details the Dot Process function for enhancing photo scans on specific models.
Instructions for adjusting the size of scanned originals during printing.
Explains the zoom function for precise enlargement/reduction of scanned items.
How to adjust scanning levels for originals with varying text or image density.
Function to erase binding shadow from bound originals like magazines and books.
Enables printing two originals side-by-side on a single sheet.
Details paper size, orientation, and ratio limitations for 2-Up printing.
Provides a general step-by-step guide for scanning and printing operations.
Configures the machine for continuous master-making and printing cycles.
Activates a mode to reduce ink consumption during printing.
Allows printing sample copies to check quality before final output.
Explains how to adjust print density levels for optimal output quality.
Guides on adjusting the vertical and horizontal print positions.
Details how to select print speed from five levels for efficiency.
Enables printing and sorting into multiple groups of sets from originals.
Step-by-step guide to set up programmed printing for single-page documents.
Instructions for setting up programmed printing using multiple original documents.
How to store frequently used program settings for later retrieval.
Explains how to access and use previously saved program settings.
Process for modifying existing stored program settings.
How to delete stored program settings from the machine.
Function to ensure consistent print quality after periods of inactivity.
Secures confidential documents by discarding masters after printing.
Allows changing default machine settings for various functions.
Instructions for configuring network IP addresses for machine connectivity.
Overview of the User Management function for security and access control.
Process for registering administrators and users with PIN codes and access restrictions.
How to enable or disable the User Management function.
Allows disabling specific users from accessing the machine.
Sets limits for total counts or master counts per user.
Resets total or master count limits for individual users.
Clears all copy and master counts for all users simultaneously.
Sets a reminder date for outputting ID counter reports.
Prints a report detailing machine usage by all users.
Deletes all user management configurations, including administrator settings.
Step-by-step instructions for replacing an empty ink cartridge.
Guide on how to replace the master roll when it is consumed.
Procedure for emptying the box that collects used masters.
Information on properly disposing of used ink cartridges, master rolls, and ejected masters.
Instructions for removing and reinstalling the print drum (cylinder).
Safety precautions to observe before performing any cleaning procedures.
Instructions for cleaning the delicate thermal print head.
How to clean the glass platen and its cover.
Cleaning procedures for the scanner glass and ADF white sheet.
Steps to clean the pressure roller to prevent smudges.
How to clean the exterior casing of the machine.
Explains how the machine indicates errors and their locations.
How to interpret error indicators and numbers to diagnose issues.
Troubleshooting steps for errors indicated by specific area lights.
How to interpret and set parameters when an "H" code appears.
General tips for resolving common printing problems before contacting service.
Lists and describes various optional accessories available for the machine.
Provides detailed technical specifications for the RISO EZ390 model.
Compares features available across different RISO EZ series models.
To Next Page
