To Next PageTo Next PageHow to fix a paper jam on the paper feed tray section of Riso CZ180?
If a paper jam occurs on the Paper Feed Tray section of your Riso Printer, first, press the key to lower the Paper Feed Tray and remove the jammed paper. Then, set the paper again. If the error indications do not disappear, press the key.
How to set a master roll correctly in Riso CZ180?
If a master roll has not been correctly set in your Riso Printer, open the Master Making Unit Cover, remove the master roll, and set the master correctly. If the master is loose, turn the right flange inward to correct it, and close the Master Making Unit Cover.
How to correctly set a master in Riso CZ180 Printer?
If a master has not been correctly set in your Riso Printer, open the Master Making Unit Cover, remove the master roll, and set the master correctly. If the master is loose, turn the right flange inward to correct it, and close the Master Making Unit Cover.
How to remove unnecessary master from the print drum cylinder of Riso Printer?
If an unnecessary master remains on the Print Drum (Cylinder) of your Riso Printer, pull out the Print Drum (Cylinder). Press the Print Drum Release Lever and turn the Drum (Cylinder) until the clamp plate comes to the top. Press the Clamp Plate Release Lever to unlock the clamp plate and separate the Master from the Print Drum (Cylinder). Rotate the Print Drum until it is locked by the Print Drum Release Lever. Set the Print Drum into the machine. Open the Master Making Unit Cover and set the master again. Close the Master Making Unit Cover. Perform the master-making operation again.
What to do if the tray has run out of paper in Riso Printer?
If the tray has run out of paper in your Riso Printer, place paper on the Paper Feed Tray.
How to correctly wrap a master around the print drum cylinder of Riso CZ180?
If a master has not been correctly wrapped around the Print Drum (Cylinder) of your Riso Printer, pull out the Print Drum (Cylinder). If no master is wrapped around the Print Drum (Cylinder), proceed to Step 6. If wrapped, proceed to Step 2. Press the Print Drum (Cylinder) Release Lever and turn the Drum (Cylinder) until the clamp plate comes to the top. Press the Clamp Plate Release Lever to unlock the clamp plate and separate the Master from the Print Drum (Cylinder). Rotate the Print Drum until it is locked by the Print Drum Release Lever. Set the Print Drum into the machine. Open the Master Making Unit Cover and set the master again. Close the Master Making Unit Cover. Perform the master-making operation again.
What to do if a master jam has occurred in the master disposal section of Riso CZ180 Printer?
To address a master jam in the master disposal section of your Riso Printer, remove the Master Disposal Box and take out the jammed master. If you still cannot remove the jammed master, open the Master Disposal Unit and remove the master.
How to remove an original jam in the ADF unit of Riso CZ180 Printer?
If an original jam has occurred in the ADF Unit of your Riso Printer, remove the jammed original. Grasp the Original Release Lever and open the ADF Cover to remove the jammed original.
What to do if a paper jam has occurred on the paper receiving tray section of Riso CZ180 Printer?
To resolve a paper jam on the Paper Receiving Tray section of your Riso Printer, remove the jammed paper. If you've changed the horizontal paper position, adjust the position of the Receiving Tray Paper Guides as well. If the error indications persist, press the key.
General| Type | Digital Duplicator |
|---|---|
| Ink Type | RISO Ink |
| Ink Colors | Black |
| Max Paper Size | A3 |
| Paper Weight | 46 gsm to 210 gsm |
| Paper Feed Tray Capacity | 1000 sheets |
| Printing Method | Stencil Printing |
Precautions for machine installation.
Safety warnings for connecting the power cord.
Recommended environment and safe handling procedures.
Usable paper specs, restrictions, and feeding tips.
Advice to prevent paper jams and improve feeding.
Usable original sizes, weights, and required margins.
Defines max printing areas and lists prohibited materials.
Identifies and describes machine components.
Adjusting paper feed/stripping pressure based on paper type.
Choosing Line, Photo, or Duo mode for master making.
Using keys and guides to adjust print position vertically and horizontally.
Lists changeable items like Print Speed, Auto-Process, Scanning Level.
Lists changeable items like Beep Sound and Minimum Print Quantity.
Lists changeable items like Semi-Auto, Job Separation, paper size, and displays.
Step-by-step guide to replace the ink cartridge.
Procedure for opening unit, unlocking, and installing new master roll.
Step-by-step guide to safely remove the print drum.
Explains indicators showing error locations, types, and numbers.
