What to do if a screen master is jammed in my Riso Printer?
If a screen master is jammed in your Riso Printer, remove the Screen Master Roll and set it correctly again. Refer to the section on 'Setting a New Screen Master Roll' for detailed instructions.
How to fix a Riso Printer when a screen master has not been fed correctly?
If a screen master has not been fed correctly into the Riso Printer, remove the Screen Master Roll and set it correctly again, following the instructions in 'Setting a New Screen Master Roll'.
What to do if a screen master is not cut correctly in my Riso GOCCOPRO 100?
If a screen master is not cut correctly by the Riso Printer, cut a new screen master. For tips, see 'Troubleshooting (Tips)' and 'A screen master has not been cut.'
This guide provides instructions for basic operation, precautions, and troubleshooting.
Information on RISO trademarks and liability limitations.
Highlights simple operation, automatic screen cutting, and space-saving design.
Details useful functions like margin setting and high-resolution perforation.
Explains how to reproduce stored screens and manage data.
Notes requirements for connecting to Macintosh computers.
Explains the meaning of warning, caution, and note icons used in the guide.
Describes how operations, procedures, and illustrations are presented.
Details how error indicators and numbers help diagnose issues.
Provides practical advice for common problems.
Lists the supplementary sections available in the manual.
Describes matters to know and precautions to follow before using the machine.
Covers machine placement, stability, and environmental conditions.
Details precautions for power supply, cords, and grounding.
Specifies the recommended temperature and humidity ranges.
Provides safety guidelines for moving and operating the machine.
Indicates the presence and importance of caution labels on the unit.
Precautions for connecting power plugs and using extension cords.
Guidelines for installing drivers before connecting to a computer.
Safe practices for handling the machine and storing screen masters.
Procedure for creating imaged screens from non-standard data sizes.
Explains the relationship between original data and screen transfer.
Details minimum/maximum image area and transfer limits.
Explains margin purpose, calculation, and settings.
Advises against using the machine for illegal or infringing purposes.
Identifies key parts on the main unit like the control panel and tray.
Instructions for attaching and removing the imaged screen tray.
Identifies components on the power switch side of the machine.
Details the function of indicators and buttons on the control panel.
Explains key operations and how to use offline mode.
Illustrates the basic process from machine power-on to printing.
Procedure for setting a new screen master roll into the machine.
Guide for installing the necessary printer driver software.
Step-by-step instructions for replacing the screen master roll.
Final steps for installing the screen master roll.
Instructions for installing the driver via USB connection.
Key requirements and checks before starting driver installation.
Step-by-step guide for the installer program.
Steps for finalizing installation and printing a test page.
Steps to complete the driver installation and reboot the computer.
Instructions for configuring USB ports for different Windows OS.
Procedure for creating a USB port for driver installation.
Steps to verify successful connection of the USB device.
Requirements and setup before establishing network connection.
Initial steps for setting up network connection.
Steps for configuring network port and completing setup.
Steps to prepare the machine before creating an imaged screen.
Procedure for sending original data to the machine via computer.
Details on print image preview and specifying original data size.
Explains screening types and the auto screen making function.
Details on image adjustments and line art expression methods.
Settings for text thickness, restoring defaults, and driver info.
Procedure for selecting a frame and starting the screen making process.
Instructions for setting custom margin sizes using the MANUAL key.
Explains indicators related to thermal print head temperature.
Details indicator states and actions for overheating errors.
Analyzes conditions causing overheating warnings based on cover ratio.
Lists items that can be changed in the machine's custom setting mode.
Details settings for auto power off, beep sounds, and unit display.
Settings for frame registration and minimum margin.
Setting the timer for automatic power off.
Settings for IP address and initializing network/custom modes.
Procedure to access and enter the custom setting mode.
Steps for selecting and modifying setting items and their values.
Steps to measure and register custom frame sizes.
Final steps to save registered frame sizes.
Instructions on how to delete previously registered frames.
Procedure for setting the IP address for the network card.
Final steps to set and confirm the IP address.
Procedure to reset custom settings and network card to factory defaults.
Introduction to machine maintenance and cleaning.
Guidelines for periodic cleaning of machine components.
Important safety warnings for performing maintenance tasks.
Detailed steps for cleaning the thermal print head.
Instructions for cleaning the external surfaces of the machine.
How to diagnose issues based on error indicators.
Practical tips for resolving common machine problems.
Describes common error codes (A-01, A-17, A-34) and their solutions.
Details other error codes (None, b-32/b-33, L-01) and their resolutions.
Addresses overheating errors (P-90, F-34) and cooling down status.
Troubleshooting for power, image transfer, and missing data problems.
Troubleshooting for screen master cut issues and operational errors.
Actions for ONLINE indicator issues and cable connection problems.
Troubleshooting driver settings, application compatibility, and support.
Resolving issues where image data is displaced or edges are missing.
Fixing problems with font appearance and graphic transfer.
Resolving image deformation or reduction in size issues.
Troubleshooting problems with entering or displaying original sizes.
Guide to registering custom original sizes in the printer driver.
Procedure for installing the printer driver without the installer.
Instructions for removing the printer driver software.
References to details on consumables, options, and machine specs.
Steps for entering custom original sizes into the driver.
Finalizing the registration of custom original sizes.
Detailed steps for manual USB driver installation on Windows 10.
Detailed steps for manual USB driver installation on Windows 8.1/8.
Detailed steps for manual USB driver installation on Windows 7.
Detailed steps for manual USB driver installation on Windows XP.
Detailed steps for manual network driver installation on Windows 10.
Detailed steps for manual USB driver installation on Windows Vista.
Detailed steps for manual network driver installation on Windows Vista.
Procedure for removing the driver using its uninstaller.
Steps for manual uninstallation on Windows 10, 8.1, 8, and 7.
Steps for manual uninstallation on Windows Vista.
Information on different RISO screen master rolls and their applications.
Details on optional accessories like the Macintosh driver and network card.
Guidance on disposing of used screen master rolls.
Technical details on screen making method, time, image area, and resolution.
Details on margin settings and screen length capabilities.
Specifications for custom modes, supported OS, and screen feed.
Information on machine dimensions, weight, and safety ratings.
Lists supported options and notes on environmental conditions.
Explains the WEEE Directive and the meaning of disposal symbols.
To Next Page
General
