Chapter 9 Replacing Consumables
164
12
Close the pull-out cover of the
master making unit.
Replacing the Ink Cartridge
1
Open the front door.
2
Pull out the depleted ink cartridge.
1 Turn the ink cartridge counterclockwise.
2 Pull out the ink cartridge to the front.
When the ink is depleted, a message is displayed
and this machine stops.
Replace the ink cartridge with a new one.
Ink may be left on the area around the print drum
(cylinder). Take care not to smudge your hands or
clothes with the ink.
Wash immediately with soap if you get ink on your
hands, etc.
BIt is recommended to use products
specified by RISO when replacing the
ink cartridge.
BKeep the power on while replacing the
ink cartridge.
BReplace with an ink cartridge of the
same ink color. If you want to change
the ink color, replace the entire print
drum (cylinder). (A 167 “Replacing the
Print Drum (Cylinder)”)
BDispose of the depleted ink car-
tridge according to the disposal
regulations of your local commu-
nity.
(A 169 “Collecting and Disposing
of Depleted Consumables”)
Caution
2
1
Unlock
To Next Page
Loading...