RITE-HITE Dok-Commander - SAFETY; Safety Identifications; General Safety

Dok‑Commander
®
Installation/Service/Owner's Manual Rite‑Hite
®
4 Publication: AMEN00070 2020-01-30
SAFETY
Safety Identifications
DANGER
Indicates a hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING
Indicates a hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION
Indicates a hazardous situation which, if not
avoided, could result in minor or moderate injury.
NOTICE
Indicates a situation which can cause damage to the
equipment, personal property and/or the environment,
or cause the equipment to operate improperly.
NOTE: A note is used to inform you of important
installation, operation, or maintenance information.
Lockout Procedure
Barricade work area and post safety warnings.
Power supply and control must:
• Be disconnected or locked in OFF position
using a lockout device approved by local
codes.
• Have signage that;
− Clearly states repairs are being made.
− Identies person responsible for lockout condition.
NOTE: Only this person should be able to remove
warnings and lockout device.
− Withstands environmental conditions (weather,
wet, and damp, etc.) and remains readable.
General
DANGER
A qualied electrician should install the wiring in
accordance with local electrical codes.
Use lockout procedures to prevent death or severe
personal injury.
WARNING
Cancer and Reproductive Harm
www.P65Warnings.ca.gov
190820