2
II. CARE INSTRUCTIONS
1. Lubricate moving joints with silicon spray after periods of usage.
2. Be careful not to damage plastic or metal parts of the machine with
heavy or sharp objects.
3. The machine can be kept clean by wiping it down using dry cloth.
4. Check and adjust the tension of wire rope on a regular basis.
5. Regularly check all moving parts and make sure there are signs of wear
and damage, if any the use of the device must be stopped immediately
and contact our after-sales department.
6. During inspection, it is necessary to make sure that all bolts and nuts
are completely fixed. If any bolt or nut connection is loosened, please
re-tighten.
7. Check weld for cracks.
8. Failure to perform daily maintenance may result in personal injury or
equipment damage.
To Next Page
Loading...