Rittal Liquid Cooling Package 5
1 Notes on documentation
1
1 Notes on documentation
1.1 CE labelling
Rittal GmbH & Co. KG confirms the conformity of the
cooling unit with the European Union's Machinery Direc-
tive 2006/42/EC and EMC Directive 2014/30/EU. A cor-
responding declaration of conformity has been issued,
you can find it in section16.7 "Declaration of Conform-
ity". These are the original operating instructions.
The cooling unit bears the following mark.
1.2 Storing the documents
The assembly and operating instructions as well as all
applicable documents are integral components of the
product. They must be handed out to those persons
who are engaged with the unit and must always be avail-
able and on hand for operating and maintenance per-
sonnel.
1.3 Symbols in these operating instructions
The following symbols are found in this documentation:
This symbol indicates an "Action Point" and shows
that you should carry out an operation/procedure.
1.4 Other applicable documents
In conjunction with these assembly and operating in-
structions, the superordinate system documentation (if
available) also applies.
Rittal GmbH & Co. KG is not responsible for any damage
which may result from failure to comply with these as-
sembly and operating instructions. The same applies to
failure to comply with the valid documentation for acces-
sories used.
1.5 Normative instructions
1.5.1 Legal information concerning the operating
instructions
We reserve the right to make changes in content. Rittal
GmbH & Co. KG will not be held liable for any mistakes
in this documentation. Liability for indirect damages
which occur through the delivery or use of this docu-
mentation is excluded to the extent allowable by law.
1.5.2 Copyright
The distribution and duplication of this document and
the disclosure and use of its contents are prohibited un-
less expressly authorised.
Offenders will be liable for damages. All rights created by
a patent grant or registration of a utility model or design
are reserved.
1.6 Software update
These instructions apply to software version V3.17.00.
This documentation shows the English screenshots.
The descriptions of individual parameters on the Liquid
Cooling Package website also use the English terminol-
ogy. Depending on the set language, the displays on the
Liquid Cooling Package website may be different (see
assembly and operating instructions for the IoT Interface
3124.300).
Danger!
Hazardous situation which causes death
or serious injury if the instructions are
not followed.
Warning!
Hazardous situation which may lead to
death or serious injury if the instructions
are not followed.
Caution!
Hazardous situation which may lead to
(minor) injuries if the instructions are not
followed.
Note:
Information concerning individual proce-
dures, explanations, or tips for simplified ap-
proaches. Also indicates situations which
may result in material damage.
To Next Page