Need help?Do you have a question about the Rittal SK 3210.100 and is the answer not in the manual?
General| Rated operating voltage | 230 V |
|---|---|
| Weight | 120 kg |
| Material | Sheet steel |
| Protection class | IP54 |
| Color | RAL 7035 |
| Mounting | Wall-mounted |
| Type | Wall-mounted |
General precautions for assembly, installation, and servicing by trained personnel.
Explains purpose of air/water heat exchangers for cooling enclosures.
Describes the three main components: heat exchanger, fan, and magnetic valve.
Explains the controller for setting functions, basic or e-Comfort.
Describes thermal winding protection, floating contacts, and leak/condensate warning.
Describes fault signal activation and display warnings upon leakage.
Outlines intended use and hazards of improper use like open enclosures.
Emphasizes weight limits, electrical work by electricians, and insulated tools.
Provides criteria for selecting installation location, including orientation and temperature.
Details steps for assembling the unit onto an enclosure.
Details how to connect the flexible condensate discharge hose.
Explains connecting the cooling water hoses, including insulation.
Provides guidelines for cooling water composition to prevent damage.
Covers electrical installation requirements and guidelines.
Emphasizes national regulations, qualified electricians, and connection data.
Steps to take after assembly and installation to start the unit.
Guides on interpreting system messages and troubleshooting faults.
Outlines maintenance procedures and warnings.
Provides detailed technical data for the units.
To Next Page
