Need help?Do you have a question about the Rittal MICROSOFT 48Ux1200x1200 MOR and is the answer not in the manual?
General| Brand | Rittal |
|---|---|
| Model | MICROSOFT 48Ux1200x1200 MOR |
| Category | Industrial Equipment |
| Language | English |
Provides guidance for using the Microsoft MoR Generation 6 Series Racks.
Outlines the legal disclaimer for using the Rittal MoR Generation 6 racks.
Defines the intended use of the MoR Generation 6 rack range for IT equipment.
Lists restrictions and limitations for the rack's permissible use as an electrical cabinet.
Describes potential misuses like misconfiguration or exceeding transport limits.
Categorizes users based on expertise (Skilled, Instructed, Ordinary Persons) for handling.
Details specifications for the 48U MOR Packaged Rack (7844.440).
Details specifications for the 48U MOR Packaged Rack w/o pallet (7844.441).
Details specifications for the Packaged Rack MOR PRD 12X12 48U ASM (7844.477).
Emphasizes that only skilled or instructed persons should handle the rack.
Explains the meaning of various safety alert symbols used in the manual.
Provides Rittal factory torque settings for rack to pallet interfaces.
Describes the QR code label used to obtain the latest instruction manual.
Shows a visual representation of the name plate label with various symbols.
Explains the meaning and purpose of each numbered safety label on the rack.
Lists the items covered in the user documentation leaflet, including QR link and legal disclaimer.
Illustrates the placement of the Name Plate Label, User Documentation Leaflet, and Safety Labels on the rack.
Warnings for receiving, moving, and forward shipping, focusing on tip hazards.
Cautions for unpacking or repacking the rack, emphasizing tip hazards and PPE.
Warnings for unbolting the rack from the shipping pallet, highlighting tip hazards.
Warnings for removing the rack from the shipping pallet, emphasizing tip hazards.
Warnings for moving the rack on castor wheels, focusing on tip hazards and route planning.
Warnings for levelling the rack on feet, covering floor conditions and weight distribution.
Warnings for bolting the rack down to the data centre floor, emphasizing secure installation.
Warnings for baying or joining racks together, noting limited stability.
Caution for general installation or work with the rack, stressing securing and PPE.
Warnings for rack integration before forward shipping or at data centre, covering handling and stability.
Warnings regarding electrical hazards, stressing the need for Common Bonding Network connection.
Instructions and warnings for receiving the rack, including weight variations and shipping guidelines.
Rittal's disclaimer for handling damage and guidance on inspecting received packages.
Warnings and instructions for safely removing the rack from its pallet.
Step-by-step instructions for unpacking the 7844.440 rack model.
Warnings related to unbolting the rack from the pallet and moving it.
Steps for unpacking the 7844.477 rack model, including corner post and polybag removal.
Warnings and procedures for removing the 7844.477 rack from the pallet.
Identifies accessory kits supplied with the rack, like front baffle bracket and cage nut kit.
Notes that not all MoR racks are ship loadable and advises checking specifications.
Warnings and guidance for handling and securing the rack before forward shipping or data centre integration.
Details Rittal factory torque settings for rack to pallet interfaces.
Warnings and procedures for moving the rack using castor wheels, including route inspection and ramp limits.
Clarifies that castors are for empty racks only and equipment installation should wait until final position.
Emphasizes the need for rack grounding via Common Bonding Network (CBN).
Instructions and warnings for levelling the rack, including foot deployment and floor conditions.
Details the bolt-down kit (7844246) and its contents for securing the rack.
Instructions for installing baying kits (600mm or 24") after bolt-down.
Details the contents of the Airflow Baffle Kit and its installation.
Lists the components included in the 42U and 48U Front Door Kits.
Illustrates hinge and lock catch positions and screw fitting for front doors.
Explains how to fit the grounding cable to the front door and frame.
Lists the components included in the 42U and 48U Rear Door Kits.
Instructions for installing back door hinges, specifying torque and quantity.
Details how to fit the grounding cable to the rear door and chassis.
Lists part numbers for unique lock inserts and the procedure to change them.
Instructions for cutting and positioning magnetic strips for bayed racks.
To Next Page
