Need help?Do you have a question about the Rittal SK 3184800 and is the answer not in the manual?
General| Brand | Rittal |
|---|---|
| Model | SK 3184800 |
| Category | Cooling boxes |
| Language | English |
Instructions for assembling and operating the enclosure cooling unit.
General safety guidelines for installation and operation of the cooling unit.
Safety guidelines for electrical and general installation.
Safety advice for operating the cooling unit.
Safety precautions for performing maintenance.
Specifies qualifications for personnel operating or maintaining the unit.
Highlights potential dangers during unit usage.
IT security measures for protecting products and systems.
Specific IT security measures for products and systems.
Detailed description of the cooling unit's function and parts.
Explains the operational principles of the cooling unit.
Details the components of the compression refrigerant circuit.
Describes the heat pipe refrigerant circuit and its operation.
Identifies and illustrates the main components of the cooling unit.
Describes the controller used for setting cooling unit functions.
Explains built-in safety features to prevent pressure increases and icing.
Defines the proper usage and prohibited uses of the cooling unit.
Guidelines for safely transporting the cooling unit.
Specific instructions for transporting units already mounted on enclosures.
Safety regulations for electrical and mechanical installation.
Criteria for selecting a suitable installation site for the enclosure.
Step-by-step guide for assembling the cooling unit.
Detailed instructions for the assembly process.
Describes external and internal mounting choices for the cooling unit.
Instructions for creating the necessary cut-out for mounting.
Steps for externally mounting the cooling unit.
Steps for internally mounting the cooling unit.
How to connect the condensate water discharge hose.
Important notes and regulations for electrical installation.
Important notes and regulations for electrical installation.
Recommendations for overvoltage protection and supply line load.
Connecting the unit to the customer's potential equalisation system.
Instructions for installing the power supply and signal cables.
How to connect the alarm relay for system messages.
Overview of available interfaces for external communication.
How to operate the cooling unit using the front display.
General principles for programming the cooling unit's functions.
Information on using the Updater program for software updates.
Configuring various settings through the unit's display.
Choosing the temperature sensor for cooling control.
Adjusting the desired temperature setpoint for the unit.
Changing the temperature display unit between Celsius and Fahrenheit.
Activating a test function to check cooling operation.
Procedures for manually resetting system error messages.
Visual overview of the unit's programming structure and menus.
Introduction to the Rittal Scan & Service app and its use.
Introduction to the Rittal Scan & Service app and its use.
Making basic settings and device configurations via the app.
Setting alarm limits for temperature deviations.
Viewing current and historical system messages in plain language.
Viewing operating data like EER and temperature history.
System message for an open enclosure door.
System message for an open enclosure door.
Message indicating high internal temperature.
Critical safety precautions before performing maintenance.
General guidance on cleaning and maintenance tasks.
Instructions for cleaning components using compressed air.
Steps for removing an internally mounted unit for cleaning.
Steps for removing an externally mounted unit for cleaning.
Instructions for safely removing the unit's cover.
Detailed steps for cleaning internal components with compressed air.
Steps for reassembling the cooling unit after cleaning.
Performance data like cooling output and efficiency.
Electrical parameters such as voltage, frequency, and current.
Specifications related to the refrigerant circuit.
Diagrams showing the required mounting cut-out dimensions.
Detailed dimensions for external and internal mounting.
Detailed dimensions for external and internal mounting.
Detailed dimensions for external and internal mounting.
To Next Page
