Need help?Do you have a question about the Rittal 3370.32 Series and is the answer not in the manual?
General| Brand | Rittal |
|---|---|
| Model | 3370.32 Series |
| Category | Cooling boxes |
| Language | English |
Explains how the unit's controller manages operation, including fan and compressor functions.
Describes the function of the display terminal (H1) and how it indicates temperature and system messages.
Lists and explains the various parameters that can be adjusted for configuring the cooling unit's operation.
Details the methods for navigating through and modifying the unit's operational parameters using the keypad.
Explains how to set the desired internal enclosure temperature for the cooling unit.
Describes how to define the acceptable temperature range for the cooling unit's operation.
Illustrates and explains the different indicators and information shown on the controller's display.
Identifies and explains the function of each button on the controller's interface.
Details the procedure for manually switching the compressor on and off, and functions disabled in OFF status.
Explains alarm parameters like temperature differential (A0) and their impact on high temperature alarms.
Provides a guide to interpreting system messages, alarm relays, and their corresponding actions.
Describes the forced cooling mode, its activation, and duration for rapid temperature reduction.
Explains the thermodynamic cycle of the cooling unit, from compressor to evaporator.
Details how condensate water formed during operation is drained from the unit.
Explains the methods for physically fitting the cooling unit onto or into an enclosure.
Provides specific steps for attaching the unit to the exterior of an enclosure using sealing tape and screws.
Describes the process for partially mounting the cooling unit inside an enclosure using mounting bars.
Outlines the requirements and procedures for safely connecting the cooling unit to the power supply.
Specifies the voltage, frequency, and connection type required for the cooling unit's electrical hookup.
Discusses essential measures for overvoltage protection and ensuring sufficient power line capacity.
Explains the method for cleaning unit components using compressed air, with safety warnings.
To Next Page
