To Next PageTo Next Page
Need help?Do you have a question about the Rittal SK 3361. series and is the answer not in the manual?
General| Brand | Rittal |
|---|---|
| Model | SK 3361. series |
| Category | Air Conditioner |
| Language | English |
Details the two sets of assembly and installation instructions provided for the units.
Confirms that the Declaration of Conformity is supplied separately with the unit.
Emphasizes that instructions are integral to the product and must be given to the plant operator.
Explains the meaning of symbols used for safety and instructions within the manual.
Explains how enclosure cooling units dissipate heat and protect internal components.
Details the basic refrigeration cycle components and operation of the cooling unit.
Describes the controllers used for setting cooling unit functions, Basic or Comfort.
Explains serial interface X2 for connecting multiple cooling units in a master-slave configuration.
Details the safety features like pressure-operated switches and thermal winding shields.
Addresses condensation formation on the evaporator coil and its automatic evaporation.
Discusses the use, function, and cleaning of filter mats for the cooling unit condenser.
Explains the function and connection of an optional door limit switch for the cooling unit.
Describes the optional interface card X3 for higher-level monitoring systems.
Guidance on selecting the optimal location for enclosure cooling unit installation.
Covers packaging checks, enclosure sealing, and initial setup considerations.
Guidance on arranging components within the enclosure for optimal airflow.
Details external, partial internal, and full internal mounting methods.
Instructions for connecting the condensate discharge hose and managing water drainage.
General notes on electrical installation requirements, including regulations and qualified personnel.
Covers connection data, overvoltage protection, three-phase devices, flicker standard, and potential equalization.
Covers bus connection, serial interface X3, and power supply installation.
Includes installing filter media and fitting the cooling unit display and grille.
Explains the function of the filter mat monitor and how it detects soiling.
Operating the unit using the Basic controller, including its properties and displays.
Operating the unit using the Comfort controller, detailing its features and display.
Details the programmable parameters, their ranges, factory settings, and descriptions.
Visual guide showing the sequence of operations for programming parameters on the Comfort controller.
Lists system messages, their causes, and measures to rectify faults.
Explains how to assign identifiers to master and slave cooling units for network configuration.
Describes how system messages are indicated and the need to reset the controller after fault rectification.
Comprehensive table of system messages, possible causes, and fault rectification measures.
Procedure to reset the Comfort controller after specific fault messages like A03, A06, and A07.
Covers compressed air cleaning, component disassembly, and cleaning of internal parts.
Detailed specifications for various RITTAL cooling unit models, including electrical and physical data.
Provides detailed dimensional drawings for external mounting of cooling units.
Detailed dimensional drawings for partial internal mounting of cooling units.
Detailed dimensional drawings for full internal mounting of cooling units.
