Need help?Do you have a question about the Rivera R55-112 and is the answer not in the manual?
Introduction to the Rivera amp, emphasizing its importance to the user's sound and the company's commitment to quality.
Instructions for unpacking the amp and advice on saving packing materials for future transport.
Explanation of safety symbols, high voltage warnings, and essential safety precautions.
Essential steps for plugging in and initially operating the amplifier.
Suggested amplifier settings for different inputs and channels to achieve various tones.
Diagrams and explanations of the front panel layout, including input jacks.
Introduction to the controls for Channel 1 and Channel 2.
Detailed explanation of Volume, Bass, Middle, Treble, and Boost controls.
Explanation of Master, Reverb, Presence, Standby, and Power controls.
Description of the rear panel components, including the mains input socket.
Information on mains fuses and HT fuses, including types and ratings for different models.
Details on speaker outputs, impedance, and power handling for various R Series models.
Explanation of the Line Out and Footswitch jack functions and usage.
How to use the patch section for driving slave amps or accepting external signals.
Guidance on setting input and output levels for external signal processors.
Details on using the effects loop for connecting external effects processors.
Illustrations and instructions for connecting extension speaker cabinets to various models.
Instructions for running two Rivera amps in parallel without a Y-cord.
Methods for slaving a second amp or power amp using Line Out or Effects Loop.
Guidance on placing signal processors within the amp's effects loop.
Instructions for sending a direct signal from the amp's Line Out to PA systems or recorders.
Advice on protecting the amp from elements, proper handling, and cleaning.
Essential checks before playing, including tubes, power cord, and cleaning.
Guide to diagnosing and resolving common amplifier issues like no sound or power.
Troubleshooting steps for unexpected amp shutdowns or lack of sound.
Diagnosing and resolving issues related to unwanted distortion and blown fuses.
Identification of tube types, their locations, and functions for R30-112/Chubster 40.
Information on EL-34 and 12AX7A tube types, sources, and replacement guidelines.
Specific tube types and their locations for the R100-212 model.
Methods for identifying and diagnosing microphonic tubes.
Procedure for troubleshooting preamp tubes by tapping and listening for ringing.
Steps for diagnosing and replacing faulty power amp tubes.
Details on the warranty period, what is covered, and exceptions like tubes and speakers.
Specific obligations of the user and manufacturer, and exclusions from warranty coverage.
To Next Page
General
