Need help?Do you have a question about the Rivera RockCrusher and is the answer not in the manual?
Manages bypass or attenuation modes, connecting amp to speakers.
Sets amplifier/speaker impedance (8 or 16 Ohms) for safe operation.
Adjusts high-frequency (Edge) and restores low-end (Warm) tone.
Selects desired sound level reduction in dB increments.
Controls low levels for home playing when in Studio mode.
Adjusts output level for XLR and unbalanced line outputs.
Connects to the amplifier's speaker output, matching impedance.
Jacks for connecting speaker cabinets, supports parallel 8/16 Ohm loads.
Connects to unbalanced inputs for recording/PA, always active.
Transformer-coupled output for balanced inputs, reduces ground loops.
Advice on optimizing sound, using effects, and maintaining ventilation.
Technical details including power handling, impedance, dimensions, and weight.
Covers user responsibilities, service, and conditions voiding the warranty.
General| Power Handling | 120 Watts |
|---|---|
| Inputs | Speaker Input |
| Construction | Metal Chassis |
| Impedance | 8 Ohms / 16 Ohms |
| Attenuator | Reactive Load |
| Controls | Attenuation |
| Outputs | Speaker Output |
| Type | Reactive Load Attenuator and Cabinet Simulator |
To Next Page