To Next PageTo Next Page
Need help?Do you have a question about the Riverbed SteelHead CX5080 and is the answer not in the manual?
Provides essential ESD safety procedures for handling network interface cards.
Refers to crucial safety precautions outlined in the Safety and Compliance Guide.
Addresses common installation and configuration issues for network cards.
Lists command-line interface commands for managing fail-to-block and fail-to-bypass modes.
Provides step-by-step instructions for installing network cards in 1U xx80 appliances.
Guides users through the process of installing network cards in 2U xx80 appliances.
Covers critical ESD procedures and requirements before starting NIC installation.
Provides step-by-step instructions for installing add-on cards in 1U appliances.
Guides users through the process of installing add-on cards in 2U appliances.
Covers critical ESD procedures and software requirements before starting NIC installation.
Provides step-by-step instructions for installing NICs in 1U CX xx55 and EX xx60 appliances.
Guides users through the process of installing NICs in 2U CX xx55, EX xx60, DX, and SteelFusion Core appliances.
Lists requirements for installing NICs in ESXi hosts for SteelHead-v.
Guides on configuring NICs in ESXi 5.x hosts for bypass support using VMware DirectPath.
General| Category | Network Hardware |
|---|---|
| WAN Optimization | Yes |
| Application Acceleration | Yes |
| TCP Connections | Yes |
| HTTP Connections | Yes |
| CIFS Connections | Yes |
| Protocol Optimization | Yes |
| Type | WAN Optimization |
| Supported Protocols | TCP, HTTP, CIFS, MAPI, SSL |
| Power Supply | Dual |
| Ports | 4 x 1 GbE |
| Redundancy | Yes |
