Riverbed Steelhead Series User Manual

Rack Installation Guide
Steelhead Series xx00, xx10, xx20, xx50, CMC, Cloud
Steelhead, Steelhead Mobile, Whitewater, and
Interceptor Systems
Version 6.1.2
November 2010

Riverbed Steelhead Series Specifications

General

Manufacturer	Riverbed Technology
Model	Steelhead Series
Function	WAN Optimization
Deployment	Cloud
Protocols Supported	TCP, HTTP, CIFS, MAPI
Encryption	SSL/TLS
Deduplication	Data Streamlining (Byte-level Deduplication)

Summary

Rack Installation Guidelines

Required Tools and Equipment

Mounting Series 250 and 550 to a Rack

Mounting Series 1050 and 2050 to a Rack

To open the bezel on Series 1050 and 2050 systems

Procedure to open the system bezel by pressing side buttons and sliding it forward.

Mounting the RMK-002A Rails for 1050 and 2050 Systems

Instructions for mounting RMK-002A rails for 1U xx50 systems to a four-post rack.

Mounting the System to a Four-Post Rack

Steps for mounting 1050 and 2050 systems into a four-post rack using pre-installed rails.

Mounting the System to a Two-Post Rack

Procedure for mounting 1050 and 2050 systems in a two-post rack using center-mount brackets.

Mounting Series 5050, 6050, 7050, and 9350 to a Rack

To detach the outer rails from the inner rails

Steps to detach the outer rails from the inner rails on the chassis.

To adjust the length of the outer rails

Procedure to adjust the length of the outer rails for rack post compatibility.

To install the outer rails to a rack

Steps to install the outer rail assemblies onto the rack posts.

To mount the system on a rack

Procedure for mounting the system onto the installed outer rails in the rack.

Mounting Models 3000, 3010, 5000, and 5010 to a Rack

To operate the rails

Instructions for operating the rack slide rails, including pulling out and removing the system.

To mount the system to a rack

Steps for mounting 3U systems (3000, 3010, 5000, 5010) into a four-post rack.

Mounting Models 3020, 3520, 5520, 6020, 6120, and 9200 to a Rack

To mount the inner rails to the chassis

Procedure to attach inner rails to the chassis using rail buttons and screws.

Mounting the Outer Rails to a Rack

Steps to install outer rail assemblies onto the rack posts using standard or short rack adaptors.

To mount standard brackets to the outer rails

Procedure for attaching standard mounting brackets to the outer rails.

To mount the short rack adaptors to the outer rails

Procedure for attaching short rack adaptors to the outer rails for shallower racks.

To mount the system on a rack

Steps for securing the system onto the installed outer rail assemblies in the rack.