Do you have a question about the Riverbed SteelHead CX7070 and is the answer not in the manual?
Provides ESD precautions and refers to safety guidelines for proper handling of equipment.
Guides on verifying NIC functionality and resolving common installation issues.
Provides CLI commands to enable and manage fail-to-block functionality.
Details compatible network add-on cards for SteelHead CX xx80 appliances.
Step-by-step instructions for installing NICs in 1U and 2U xx80 appliances.
Details compatible cards for SteelHead GX, xx70, SD, and Interceptor 9600.
Step-by-step guide for installing NICs in 1U and 2U appliances.
Step-by-step instructions for installing NICs in 1U CX xx55 and EX xx60 appliances.
Step-by-step instructions for installing NICs in 2U CX xx55, EX xx60, and DX appliances.
Steps to configure bypass cards for SteelHead-v on KVM and Hyper-V platforms.
| Model | CX7070 |
|---|---|
| Category | Network Hardware |
| Type | WAN Optimization |
| Concurrent Connections | up to 100, 000 |
| Memory | 64 GB |
| Power Supply | Dual redundant power supplies |
| Form Factor | Rack-mountable |
| Rack Size | 1U |
| Compression | Yes |
| Protocols Supported | TCP, HTTP, CIFS |
| Management | Web-based, CLI |



Loading...