EasyManua.ls Logo

RiverGrille Chuck Wagon - Assembly Instructions

RiverGrille Chuck Wagon
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GR2045401-RG-00/GR2045406-RG-00 10 of 27 20150831-Ver1
is being applied). Soap bubbles will appear where a leak is present.
3. If a leak is present, immediately turn off the gas supply
and tighten the leaky fittings.
4. Turn the gas back on and recheck.
5. If it is evident there is excessive abrasion or wear, or the
hose is cut, it must be replaced prior to the outdoor
cooking gas appliance being put into operation. The
replacement hose assembly shall be that specified by the
manufacturer. Contact customer service department at
(888) 837-1380, 8 a.m. - 5 p.m., Pacific Standard Time, Monday - Friday.
ASSEMBLY INSTRUCTIONS
Symbol: Some steps may require the assistance of a friend.
Step 1
Assemble the stationary caster (D)
and universal caster (E) to the grill
cart (B) with bolt (BB).
HARDWARE USED
Bolt 1/4ā€ x 15mm 16 pcs
Step 2
Turn the grill cart upside down.
Open the left and right cart
supporting legs and then open the
horizontal front and rear bar support
to hold the left and right supporting
legs in position.
Make sure the
bolts at the opposite ends of the
horiz
ontal bars go into the
locking
holes of the legs, per the
diagram.
1
2
BB
BB
D
BB
FRONT

Related product manuals