Check for parts online at w ww.HuntRiversEdge.com or call 800-345-6007
10
Operator's Manual
LOCKDOWN™ 21’ 360 1-MAN
STEP 7
7. Attach the assembled shooting rail to the
assembled stand by inserting the four vertical
supports into the four hubs. Secure with the
push button pins at the highest height position
at this time. Later, once the stand is completely
set up, use the push button pins to adjust the
height of the shooting rail. Work your way
around and move each hub one adjustment hole
at a time until you reach the desired height.
To Next Page
Loading...
