Need help?Do you have a question about the Riverside Hydronics TempTrac and is the answer not in the manual?
Explains the function of each controller button, including single presses and programming mode actions.
Details functions achieved by pressing button combinations, like locking the keyboard or entering programming mode.
Provides a guide to understanding the meaning of each LED indicator on the controller and its associated mode.
Explains the different values displayable on the upper LED readout, including temperatures and modulation percentage.
Explains default and switchable displays for the lower LED readout, including temperatures and time of day.
Provides step-by-step instructions for setting the device's current time and day using the controller buttons.
Guides the user through setting energy saving (night setback) parameters and time periods.
Details how to view and adjust modulation parameters, often requiring a passkey for access.
Defines key setpoints (St1, St2, St3) and explains their programming via the controller interface and procedures.
Explains the procedure to activate and deactivate the keyboard lock feature, preventing unintended changes to settings.
Details the process for uploading and downloading configuration programs to or from the controller using a HOT KEY device.
Guides on assigning a unique network address to each TempTrac unit for proper communication over the Modbus-RTU protocol.
Describes conditions that trigger the audible alarm and the method to silence it while the alarm condition persists.
Explains how specific alarm conditions, such as probe failures or temperature alerts, can be recovered and reset.
General| Brand | Riverside Hydronics |
|---|---|
| Model | TempTrac |
| Category | Controller |
| Language | English |
To Next Page
