RIVERSMITH River quiver - Step 3: Join the Halves; Join the Halves

STEP 3
STEP 3
4BANGER 2BANGER
Join the Halves
3
Place River Quiver on flat surface and join halves
using upper and lower coupler and coupler bolts.
Tighten all bolts evenly back and forth using 4mm
hex wrench to equalize tension on collar.
• DO NOT OVERTIGHTEN OR DAMAGE
WILL OCCUR
7
!
Coupler
6mm
Coupler
Bolts
Coupler
6mm
Coupler
Bolts