Switching the Power ON / OFF
1. Press and hold the power button for two-seconds. The LCD display will
turn on and the bike will be ready to start.
2. To switch off, press and hold the power button for two-seconds.
Power Assist Level
The level of assist determines the motor’s input while pedalling. By default,
there are 1-5 levels of power assist, 1 being the lowest, and 5 the highest. If
you wish to ride with no power assist, select 0."
Press the (up) / (down) button to select the level of power assist.
Throttle (Accelerator)
The throttle is enabled as soon as the LCD display is switched on. If you wish
to switch off the throttle, select power assist level “0”.
Switching ON / OFF the Headlight
1. Press and hold the (up) button for one second to switch on the headlight.
2. Press and hold the (up) button again to switch off the headlight.
To Next Page
Loading...
