4. AutoOFF = Auto off LCD screen (1 - 30) minutes#
The LCD screen switches OFF automatically when not in use. Select from 1 to 30 minutes.
5. Psword = LCD secure lock (default password 0000)!
This feature will lock the LCD screen and will require a password to unlock and use the electrical system.
6. BATIFo = Battery information
7. ADVSet = Advance settings#
Enter the password 1919 to access the advanced settings.
8. Reset = Reset to factory settings
Advanced Settings
9. WheelDI = Wheel diameter (default 700C)!
The wheel diameter must be set according to the tire size. Wrong tire size will cause inaccuracy in the speed readout.
10. SpdLTd = Speed limit (default 32 km / 20 miles)#
Set the maximum speed limit.
11. PAS = Pedal assist levels (default 1-5)#
Enables you to change the number of power assist levels between (1-3, 1-5, 1-7, 1-9).
12. Vol = Battery voltage (default 36V)
To Next Page
Loading...
